Bosch eBike Data in Home Assistant with a Ride Map

Nov 14, 2026 Last reply: 3 hours ago 2 Replies
Jump to replies (2)

The starting idea here is one many Bosch Smart System owners will recognise: getting the bike's battery level, range, ride status and location into the smart home without buying extra hardware or paying for a subscription. Smart-Live shows exactly that path, using an open-source custom integration called ha-bosch-ebike that talks to the Bosch Data Act API. No ConnectModule and no Flow+ plan are needed, which is the part that caught my attention first.



The setup is walked through step by step. A client application gets registered on the Bosch Data Act Portal to generate a Client ID, with the redirect URI set to a localhost callback. The integration's GitHub repository is added in HACS as a custom repository, downloaded, and then Home Assistant is restarted. After that come the Bosch SingleKey ID login, an authentication link from the logs that gets opened in a browser, and the authorization code copied from the address bar back into Home Assistant. Data access permission is then switched on under the Data Act tab.



The details that stand out to me: reloading the integration produces over 40 entities, including battery capacity, cadence, rider power, trip distance, elevation gain and motor assist speed. On the dashboard side, a JavaScript file called bosch-ebike-map-card.js is registered as a module under Dashboard Resources, located with the File Editor, and a manual YAML card is added. The finished card shows an interactive map with GPS tracks of past rides, next to telemetry summaries for distance, duration, elevation, calories and speed.



One trade-off worth noting: the authentication code only stays valid for 45 to 60 seconds, so the copying step has to be quick. That is the fiddliest bit of an otherwise well-explained procedure, in my view.



Project by Smart-Live. Watch it on their YouTube channel:

formatting link


Skipping the ConnectModule entirely and going through the Bosch Data Act Portal seems like the smartest call in the whole build. Officially supported data access without a Flow+ subscription is rare in the e-bike world, and it makes the whole setup depend only on software and a login. The trade-off is that the flow depends on Bosch keeping that portal open, and the 45 to 60 second code window shows how manual the handshake still is.

A suggestion for anyone following this: with over 40 entities available, the rider power, cadence and elevation gain sensors would lend themselves nicely to long-term statistics graphs next to the map card. Seeing power output and elevation per ride over weeks would turn the dashboard into more than a route viewer. I would also try a card that highlights the battery capacity sensor right at the top, since range is the number most riders check first.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required