Tek Scope probe accessories

Sep 09, 2006 4 Replies
R

Hi,



im in need of some clip attachments and spare ground leads for P6106 (standard/3.5mm) and P6136 (submini/2.5mm) probes since i got mine without these parts (for about 15$ each which i consider to be a good price) I was not sucessful in finding a source of these (Tek or other brand that is compatible) for acceptable prices. I found some clip attachments for about 1.5$ but they are designed for larger diameter probes and dont really fit as i found out. Short spring-type ground connectors would also be useful.



Anyone knows a good source for such things?


Vote
Twitter Facebook LinkedIn
J

Robert Obermayer wrote in news: snipped-for-privacy@individual.net:

Try Sphere in Canada.

Jim Yanik jyanik at kua.net
Vote
Twitter Facebook LinkedIn
R

Already checked their site, they dont have any of the parts id need.

I guess ill end up buying some cheap tek probes that come with the parts i need and sell the bare probes again. Since ebay germany has near zero scope probe related listings (as do the

2 or 3 used-equipment-dealers over here) , ill have to go trough all the hassle of importing the parts from the US again. Doesnt sound like fun to me but what else should i do...
Vote
Twitter Facebook LinkedIn
J

Where are you located (geographically speaking)? I have a small box of miscellaneous Tek probe spare parts - maybe I can do something for you.

Any URL with a photo/drawing/dimensions of these parts?

Cheers + HTH,

- Joerg

joerg dot hau at swissonline dot ch * Lausanne, Switzerland http://homepage.sunrise.ch/mysunrise/joerg.hau/ "All standard disclaimers apply". remove the obvious from my address to reply
Vote
Twitter Facebook LinkedIn
R

Im in germany, near munich, so not that far from you and with acceptable postage rates. I have a small box of

Little hard to find, but rough descriptions: The ground leads are short black wires with a alligator clip (or small connector) on one side and a special clip contact on the other side.

The Clip attachments are intended to be plugged over the probe head, and look something like the first part above the probe head on the picture here:

formatting link

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required