Embedded Programming

Development Assistant for C: generating documentation

Hello, All! Does anybody here have good experience with this product? I have some questions on documentation generation....

3 comments posted 22yrs

posted by mrv

3 comments posted 22yrs posted by mrv

Advice for a simple embedded database

Does anyone know of a database that can run in an embedded environment? Im running eCos. Thanks!

5 comments posted 22yrs

posted by benn686

5 comments posted 22yrs posted by benn686

SocketModem question

I have a V92 SocketModem connected to an AVR M128 uC. When I send commands to the modem it seems that regardless of the...

5 comments posted 22yrs

posted by enquiries

5 comments posted 22yrs posted by enquiries

Anyone found a GOOD 128x64 sunlight readable display?

I have an application which will require a highly readable outdoor display. I am using an Optrex F-51553 but it isn't c...

19 comments posted 22yrs

posted by sirsausage

19 comments posted 22yrs posted by sirsausage

How to Build a Board with DSP chip

Hi , I want to build a board (BSP) . I have with me a TI processor . and want to use some RTOS (like pSOS/VxWorks ). I...

12 comments posted 22yrs

posted by simone81

12 comments posted 22yrs posted by simone81

CAN Bus: dynamic CAN ID?

For a new device generation communicating with CANopen I d'like to implement dynamic assignment of CAN ID's. It should...

7 comments posted 22yrs

posted by markus_5

7 comments posted 22yrs posted by markus_5

I am new in the world of embedded programming

hi, right now i am starting microcontroller 8051 programming... but i am very new in this field .. sooo some one can gui...

4 comments posted 22yrs

posted by amaragul

4 comments posted 22yrs posted by amaragul

RS232 related query

Hi, I have some confusion related to the RTS and CTS hardware flow control in RS232 serial communication. RTS is reques...

2 comments posted 22yrs

posted by amitb_blr

2 comments posted 22yrs posted by amitb_blr

embedded processors

hai, I would appreciate if some one suggest some embedded processors that have the following characteristics: -less tha...

5 comments posted 22yrs

posted by sagiraju

5 comments posted 22yrs posted by sagiraju

PIC copier

Can someone point me to a PIC-to-PIC copier that will do 16F628-20P's? Either a proven commercial product or, better ye...

2 comments posted 22yrs

posted by thomasmark

2 comments posted 22yrs posted by thomasmark

what does "host bridge" mean?

I am looking into some PCI document for the development board I have, in PCI section it mentions a lot a word, "host br...

4 comments posted 22yrs

posted by black

4 comments posted 22yrs posted by black

PIC 16f877 and MPLAB compatibilty

Hi all, I am working on a data acquistion part from a sensor to PC. I am using a PIC 16f877 and I have MPLAB IDE v5.61...

3 comments posted 22yrs

posted by bhanusamarth

3 comments posted 22yrs posted by bhanusamarth

Byte/word writes on a c167cs

We use an infineon c167cs with 16 bit ram+flash and some 8 bit peripherals. The processor has the pins wrl and wrh/bhe....

2 comments posted 22yrs

posted by dr.hoffmann.k

2 comments posted 22yrs posted by dr.hoffmann.k

Heap space using LD

Dear everybody, I'm wondering about a problem allocating an object with the "new" operator using the NIOS development t...

0 comments posted 22yrs

posted by alessandro.strazzero

0 comments posted 22yrs posted by alessandro.strazzero

using STK500 to program Atiny12

I am using the STK500 to program Atiny12. I have done the following: 1.) plugged in the ATtiny12 into SCKT3400D1. 2.) c...

6 comments posted 22yrs

posted by feilip

6 comments posted 22yrs posted by feilip