Embedded Programming

thoughts on PSOCs?

Hi - I ran into PSOCs a little while ago - and I'm having trouble figuring out *what* exactly they are... Cypress calls...

4 comments posted 21yrs

posted by mnoone.uiuc.edu

4 comments posted 21yrs posted by mnoone.uiuc.edu

inexpensive way to get into ARM?

Hi - do to the recent reccomendations from a number of people here - I think I should get familiar with ARMs. Is there...

26 comments posted 21yrs

posted by mnoone.uiuc.edu

26 comments posted 21yrs posted by mnoone.uiuc.edu

SPI slave on ATmega162: transferring data

Hello, All! I keep fighting with atmega162 and its SPI :) So now I configured slave mode. The purpose is to send 8 byte...

19 comments posted 21yrs

posted by mrv

19 comments posted 21yrs posted by mrv

General Advice

I need some input on what the best microcontroller (relatively cheap) and OS to use for a project I will be starting so...

10 comments posted 21yrs

posted by dbernat32

10 comments posted 21yrs posted by dbernat32

Mixing logic families design rules

I need to design a card that has a 3.3 volt processor on it, a couple of 5 volt CMOS parts, and interface to TTL. This...

5 comments posted 21yrs

posted by dboland9

5 comments posted 21yrs posted by dboland9

Accessible Intel ASM programming reference?

Is there something available via the Web which gives detailed ASM syntax for Intel Pentium processors? I haven't done A...

6 comments posted 21yrs

posted by mojaveg

6 comments posted 21yrs posted by mojaveg

Davicom DM9000 and big endian MCUs

Hello, Has anybody successfully connected this chip to a big endian MCU using 16 bit mode? DM9000's application note sa...

0 comments posted 21yrs

posted by jdx

0 comments posted 21yrs posted by jdx

EST VisionICE firmware for MC68332

Hey All: I've got an older EST VisionICE unit and an Alberta Micro. MC68332 demo board and I'm trying to get them to pl...

2 comments posted 21yrs

posted by ebolton

2 comments posted 21yrs posted by ebolton

SJA1000 Error Counters

Hello, I need some more detailed information about how *exactly* the error counters of the SJA1000 (in BasicCAN mode) a...

8 comments posted 21yrs

posted by tilmannreh

8 comments posted 21yrs posted by tilmannreh

USB devices

Hi, I'm interfacing a microcontroller to the USB bus, and would like to provide support for linux apps also (I already...

1 comments posted 21yrs

posted by kawakami

1 comments posted 21yrs posted by kawakami

jtag, boundary scan, TAP ....???

jtag, boundary scan, TAP, ICE ... I'm new to 'jtag' and the stuff/modules included in it. What is boundary scan? (Just...

2 comments posted 21yrs

posted by yxan

2 comments posted 21yrs posted by yxan

XA flash API help needed.

My project uses a Philips XA-49 microcontroller. I need to use the built-in Flash programming API. I have successfully...

1 comments posted 21yrs

posted by pm940

1 comments posted 21yrs posted by pm940

DIAB 5.2.0.0 Linker issue

Greetings, When using the DIAB linker for the PPC8250 target I see some anomalies in the generated o/p srec. I have a b...

1 comments posted 21yrs

posted by cunkar

1 comments posted 21yrs posted by cunkar

Radio Power Consumption

The MDS 4710/9710 radios have the following power characteristics. Transmit - 2.5 amps Online - 150 mA Standby - 25 mA...

0 comments posted 21yrs

posted by dwarus

0 comments posted 21yrs posted by dwarus

NEC v850 FCAN code

Hi, Does anybody have some example code on using the FCAN controller with the NEC v850 cores? Any application notes avai...

1 comments posted 21yrs

posted by mdeepak

1 comments posted 21yrs posted by mdeepak