Embedded Programming

Does anyone make a pin-compatible solid-state floppy replacement?

I am looking for a device which can replace a floppy drive (3.5") with a solid-state memory and be pin-compatible so I...

4 comments posted 21yrs

posted by postmaster

4 comments posted 21yrs posted by postmaster

Atmel AVR assembler

Have to write some AVR code and therefore have read the AVR Instruction Set manual and tried the assembler included in...

71 comments posted 21yrs

posted by klee

71 comments posted 21yrs posted by klee

[atmega8] Can't wake up from sleep mode

Hi. I am working with Atmega8 and I installed Timer/Count2 interrupt service routine. Following the Atmega8 manual, it...

0 comments posted 21yrs

posted by ilovecpp

0 comments posted 21yrs posted by ilovecpp

Limitations of PC-Lint??

Hi, I find that some of the very interesting features of PC-Lint (such as reporting cases of uninitialized variables, m...

0 comments posted 21yrs

posted by desai_nagendra

0 comments posted 21yrs posted by desai_nagendra

Clarification on Atmega128

Hi all, We are using atmega128 for one of our project. I heard that it is a 8 bit microcontroller, ok its accumulator a...

1 comments posted 21yrs

posted by tamilmaranz

1 comments posted 21yrs posted by tamilmaranz

Clarification about Atmega128

Hi all, We are using atmega128 for one of our project. I heard that it is a 8 bit microcontroller, ok its accumulator a...

4 comments posted 21yrs

posted by tamilmaranz

4 comments posted 21yrs posted by tamilmaranz

How to define task in RTOS

Hi all, I am going to use freeRTOS to do project, which has the following hardwar module. - 128x64 dot mono LCD graphic...

7 comments posted 21yrs

posted by cktoaster

7 comments posted 21yrs posted by cktoaster

THD measuring

Hi all. I'm need a THD (Total Harmonic Distortion) for idial triangle, saw, and square wave. En example the THD for y=si...

3 comments posted 21yrs

posted by artem.bond

3 comments posted 21yrs posted by artem.bond

Small, lightweight embedded HW to run Linux

Would you recommend any particular embedded HW with the following specs and able to run Linux? ( o ) - 5 x RS232 ports...

2 comments posted 21yrs

posted by gbrown

2 comments posted 21yrs posted by gbrown

NEC VR41xx toolchain

I'm looking for a development toolchain for the nec vr41xx processor series. I'm developing on a VR4181A-System without...

0 comments posted 21yrs

posted by pukys

0 comments posted 21yrs posted by pukys

Atmega8 Sleep mode doesn't work with USART

Hi. I'd like to use sleep operation with USART but when I use USART with sleep operation, the system was crashed. my co...

5 comments posted 21yrs

posted by ilovecpp

5 comments posted 21yrs posted by ilovecpp

can not load ELF file generated with IAR using gdb

Some code is generated using IAR; I need to load it in my dev board using arm-gdb (bare metal from http://www.codesourc...

0 comments posted 21yrs

posted by dhp-ee-nntp

0 comments posted 21yrs posted by dhp-ee-nntp

C Compiler Recommendation for ATMEL 8051 USB Development.

I am considering using an Atmel 8051 based microcontroller for a USB project (the particular device is the AT89C5130A-M...

1 comments posted 21yrs

posted by pm940

1 comments posted 21yrs posted by pm940

How to build a simple FM transmitter (with PLL)

Im interested in building an fm transmitter, but one that uses a single ic with minimal external components. The ones I...

3 comments posted 21yrs

posted by benn686

3 comments posted 21yrs posted by benn686

Chip Packaging Engineer - Toronto

Hello, Thinkpath Engineering is a large engineering services company with a 27 year track record in Engineering and Des...

0 comments posted 21yrs

posted by thinkpathengineering

0 comments posted 21yrs posted by thinkpathengineering