Embedded Programming

MSP430 users: SBW can blow JTAG fuse

For fellow MSP430 designers, especially F2xx series: There has been some confusion about this since the EZ430 pod docs...

0 comments posted 20yrs

posted by notthisjoergsch

0 comments posted 20yrs posted by notthisjoergsch

Debug U-boot though Jtag

Hi, I am a newbie to use jtag debugging. Well, I have a Paralle port Jta adapater programmed to support the target PXA2...

0 comments posted 20yrs

posted by saravanan_sprt

0 comments posted 20yrs posted by saravanan_sprt

how to find the stack size used by a function

Hi, How to find out the stack size uesd by a function.

14 comments posted 20yrs

posted by noor.fatma

14 comments posted 20yrs posted by noor.fatma

PIC EEPROM EEIF flag polarity

Just wondering if someone could suggest a workaround for this snippet of pseudo code: if ( eeif == 1 ) { eeif = 0 // wr...

5 comments posted 20yrs

posted by chinsta00

5 comments posted 20yrs posted by chinsta00

SPI Setup on AT91SAM7S256

Hi, I've spent the last few hours trying to set up the SPI port on the SAM7S256 to send single bytes on command. My sco...

5 comments posted 20yrs

posted by mborgerson.at.comcast.net

5 comments posted 20yrs posted by mborgerson.at.comcast.net

timer on pc

hi , Is it possible to read timer0 while timer2 is running parallely in a x86 PC running under DOS using assembly langu...

2 comments posted 20yrs

posted by clearminded.kkrish

2 comments posted 20yrs posted by clearminded.kkrish

MC68HC705K1 PROGRAMMER

Greetings, Does anyone have a mc68hc7805k1 programmer that they would like to part with? i will pay for the part and shi...

0 comments posted 20yrs

posted by clajthibrr

0 comments posted 20yrs posted by clajthibrr

TI AIC31 Codec

Anyone here used the TI AIC31 Codec before? We are having some trouble with noise in the output. On a scope the noise l...

0 comments posted 20yrs

posted by spamgoeshere4

0 comments posted 20yrs posted by spamgoeshere4

Seeking consultants for "Sr Embedded Software Engineer" position in Alameda, CA.

Hi , We are seeking consultants for the position "Sr Embedded Software Engineer" for our client in Alameda, CA. Job Tit...

7 comments posted 20yrs

posted by vikas220

7 comments posted 20yrs posted by vikas220

GCC compiler for ARM7-TDMI

Hi all, Anyone that has experience with some of the lower cost IDE's bassed on the GCC? We have been looking at: http:/...

34 comments posted 20yrs

posted by mj

34 comments posted 20yrs posted by mj

Miniature Displays & Sunlight Readability

Does anyone have comments or insights into sunlight readability characteristics of current miniature displays? The disp...

0 comments posted 20yrs

posted by mrmain

0 comments posted 20yrs posted by mrmain

About EZ-USB FX2 Using external clock

I use Cypress EZ-USB FX2 for a data transmit system, FX2 in Slave FIFO mode, with FPGA as the master. I write proogram...

3 comments posted 20yrs

posted by wwxbei

3 comments posted 20yrs posted by wwxbei

shell for arm processor.

Hi all! I am newbie to embedded. I was asked to create a simple shell for arm processor with 4x20 Lcd display. Basicall...

7 comments posted 20yrs

posted by muralee.vkrishna

7 comments posted 20yrs posted by muralee.vkrishna

Wi-Fi ethernet connection

Hello, In my embedded application (process control) based on coldfire processor, the ethernet module is interfaced with...

1 comments posted 20yrs

posted by Memory.R

1 comments posted 20yrs posted by Memory.R

OSE EPSILON on MAC7100 exactly MAC7111 LCEVB

I'm making some test with a Freescale MAC7111 on a MAC7100LCEVB. I use IAR as compiler and OSE EPSILON as RTOS. Now I h...

2 comments posted 20yrs

posted by g.giacomello

2 comments posted 20yrs posted by g.giacomello