Embedded Programming

Abatron BDI2000 w/ GHS Multi?

Has anyone used the Abatron BDI-2000 on Greenhills Multi debugger? I have the bdirdi.dll, but no idea how to configure...

0 comments posted 20yrs

posted by scott

0 comments posted 20yrs posted by scott

interrupt vector on pxa255

Hi all, could help me to understand how to relocate interrupts on the pxa255 processors? The arm architecture has the i...

1 comments posted 20yrs

posted by jacek

1 comments posted 20yrs posted by jacek

POSIX cleaning ^.^ on real time What if I signal to dead thread?

POSIX cleaning ^.^ on real time What if I signal to dead thread? Nice to question again fellas. How you been! Lately, I...

1 comments posted 20yrs

posted by ahtz

1 comments posted 20yrs posted by ahtz

keil compiler

Hi All! I have two questions. 1. How to declare constants in code memory of the microcontroller using keil cross compil...

5 comments posted 20yrs

posted by aparna247

5 comments posted 20yrs posted by aparna247

8051 architecture

Why 8051 need 2 clock cycle for 1 system state?

41 comments posted 20yrs

posted by eerobert

41 comments posted 20yrs posted by eerobert

Microchip ECAN Question

Hi I am hoping to get a quicker answer than Microchip is takeing. I got a partial Answer from from the Yahoo CAN Group...

0 comments posted 20yrs

posted by NeilKurzm

0 comments posted 20yrs posted by NeilKurzm

Microblaze and SPI problem

I got a strange problem with microblaze and SPI. I have based my program upon xspi_low_level_example.c What happens is...

0 comments posted 20yrs

posted by thebestspirit

0 comments posted 20yrs posted by thebestspirit

AT91SAM7S-EK serial ports

I am surprised to learn that the AT91SAM7S-EK eval board does not bring out all three UARTs. It seems like such a basic...

3 comments posted 20yrs

posted by spamgoeshere4

3 comments posted 20yrs posted by spamgoeshere4

Setting MSC1 on StrongARM causes "data abort"

Hi all! I'm stuggling with setting of MSC1-Register on Intel StrongARM CPU. Most times it works just fine to set the de...

3 comments posted 20yrs

posted by tpo_technix_REMOVESPAM

3 comments posted 20yrs posted by tpo_technix_REMOVESPAM

Any *really old* Viewlogic / Xilinx users around here? :)

In the 1990s I used a Xilinx-only version of DOS Viewlogic, version 4 I think. Viewlogic was hacked so that schematic f...

0 comments posted 20yrs

posted by peter

0 comments posted 20yrs posted by peter

microcontroller AT89S52 programing advice

im required to make a digital clock , i made several codes using iteration for delay which give not perfect delay. So i...

5 comments posted 20yrs

posted by bromio_47

5 comments posted 20yrs posted by bromio_47

uCOS-II

I may be late to this party, but was wondering if uCOS is still free? Read about it on the rabbit pages, and also was r...

16 comments posted 20yrs

posted by ziggy

16 comments posted 20yrs posted by ziggy

Cellular Communications

I am starting a new project that will require cellular communications from a pic processor or other micro-controller. C...

0 comments posted 20yrs

posted by marty.weel

0 comments posted 20yrs posted by marty.weel

Re: Alternatives to Visual Sourcesafe?

Toby, I'm not going to participate in any 'flame-war' - but the following statement is unwarranted: > To choose CVS ove...

2 comments posted 20yrs

posted by jwestmoreland

2 comments posted 20yrs posted by jwestmoreland

OneAgain - Which Development Board to Chose?

Hi ALL I know this is a topic that is onstanly covered. I am an Electrical Engineering student and I want to play aroun...

14 comments posted 20yrs

posted by hammer1234

14 comments posted 20yrs posted by hammer1234