Embedded Programming

16390 Threads Posts
to

Serial communication of ATMega128

Hi all, Iam working on Atmega128 and STK500.Iam new to this. I need to transmit a character from controller.I have give...
4 comments posted 19yrs
posted by scinthia_245
4 comments posted 19yrs posted by scinthia_245

Debugging the Invocation of Project 1 from Project 2

Hi, The Boot ROM has the basic intialisaton stuffs and is copying the Bootloader from the Flash to RAM , then it invoke...
2 comments posted 19yrs
posted by karthik.balaguru
2 comments posted 19yrs posted by karthik.balaguru

OTP Secure Digital ?

I am looking for SD (Secure Digital) memory that can be programmed only once. Basically, once programmed, it cannot be...
25 comments posted 19yrs
posted by titani
25 comments posted 19yrs posted by titani

Rapid re-boot (Windows or Linux)

I'm working on a system using an embedded PC, and one major problem is the age the system takes to boot. To my naive mi...
13 comments posted 19yrs
posted by paul
13 comments posted 19yrs posted by paul

can microSD be write protected?

Hello, Is there a way to write-protect microSD flash cards? There is no mechanical switch on the little card. Can it be...
3 comments posted 19yrs
posted by titani
3 comments posted 19yrs posted by titani

who makes microSD memory?

Who manufactures microSD cards? There are many brands, but I am trying to get to the actual manufacturer. Thank you very...
3 comments posted 19yrs
posted by titani
3 comments posted 19yrs posted by titani

pin swap in SDRAM

Hi, to ease the routing of my PCB, I'd like to swap some data lines on a SDRAM. I'd like to be 100% sure that the swapp...
7 comments posted 19yrs
posted by tullio.grassi
7 comments posted 19yrs posted by tullio.grassi

Embedded application on PS3, dev questions

Can anyone answer a couple of questions for me about developing for the Cell BE on the PlayStation 3? My big question i...
2 comments posted 19yrs
posted by zwsdotcom
2 comments posted 19yrs posted by zwsdotcom

Problem using a mosfet to switch devices on/off

Hi, I'm trying to use a MOSFET whose gate is controlled by an MCU to switch on/off the Vcc of 2 devices. I'm using a sp...
14 comments posted 19yrs
posted by goister
14 comments posted 19yrs posted by goister

fx2lp out endpoint not arming (AUTOOUT mode)

In older fx2 firmware code I'm leaving the REVCTL register alone but due to some (other) EP problems I'm having, I figu...
9 comments posted 19yrs
posted by esterhui
9 comments posted 19yrs posted by esterhui

USB 2.0 Streaming through SMA

Hi All, We are trying to add a USB interface to one of our wireless modules(a transmitter and a receiver). We would lik...
9 comments posted 19yrs
posted by bkamakot
9 comments posted 19yrs posted by bkamakot

I2C Firmware Code for TI MSP430F2013

I'm currently searching the coder (firmware) who has experience with I2C bus. I am looking for firmware solutions for m...
7 comments posted 19yrs
posted by master
7 comments posted 19yrs posted by master

MSP430F2001 programming

Hi! I have an application running on F1101a which I want to migrate to F2001 (I don't use all the I/Os and the lack of...
4 comments posted 19yrs
posted by iiahim
4 comments posted 19yrs posted by iiahim