Embedded Programming

Texas Instruments Announces Lowest Power MSP430 Family

Texas Instruments has announced a 25MHz, 160uA/MHz MSP430 family. http://microcontroller.com/news/Texas_Instruments_MSP...

2 comments posted 18yrs

posted by contact01

2 comments posted 18yrs posted by contact01

How to Un-Hang a DS RTC Chip Stuck in I2C La-La-Land ???

I've been working with a Real-Time-Clock chip, the DS-1337+, and noticed that if the final I2C read operation isn't acc...

8 comments posted 18yrs

posted by bw

8 comments posted 18yrs posted by bw

HET errors

Hello, I am trying to program an HET for the TMS470R1B1M using IAR Embedded Workbench. While in the debugger, I am seei...

0 comments posted 18yrs

posted by pinalri

0 comments posted 18yrs posted by pinalri

initialization steps that I have learned

I have recently learned some initialization mistakes that I have made while programming a TMS470R1B1M and for all the n...

0 comments posted 18yrs

posted by pinalri

0 comments posted 18yrs posted by pinalri

the crown holder smet hoody seven true religion

www.shoeshive.net =96 crown dsquared jacket prices, reviews, and ratings in Clothing and Accessories . Compare products...

0 comments posted 18yrs

posted by shoeshiveb

0 comments posted 18yrs posted by shoeshiveb

ActiveSync connection

can we connect PC and WIN CE device using ActiveSync over USB connection

1 comments posted 18yrs

posted by aneeshcusat

1 comments posted 18yrs posted by aneeshcusat

Sorry,not a technical question.But need a help

Hi all, I m using SH7705(Reneasas,Hitachi) processor for my device.I need to have a debugger for debugging.I have found...

2 comments posted 18yrs

posted by haricibi83

2 comments posted 18yrs posted by haricibi83

How to modify startice.cmd to load into SDRAM of SMDK 2410

Hi, I am using MAJIC JTAG Emulator for loading , debugging, and running code in SMDK2410 Board. I am using AXD as the d...

0 comments posted 18yrs

posted by simib20

0 comments posted 18yrs posted by simib20

Adding USB Interface to Low-Cost 8-Bit Microcontroller

Hi, I work for a company that produces low-cost consumer electronics that use 8-bit microcontrollers. These have the st...

15 comments posted 18yrs

posted by dta

15 comments posted 18yrs posted by dta

AT921SAM7: jump to address in flash

Hello, MCU: at91sam7s256 toolchain: Yagarto (based on gcc-4.2.1) First image XXX bytes length is burnt on the flash at...

0 comments posted 18yrs

posted by mrv

0 comments posted 18yrs posted by mrv

Serial driver - abandon FIFO data on error?

Hi: I am working on the receive portion of a driver for the TMS320F2812 UART (SCI). The driver is interrupt driven and...

10 comments posted 18yrs

posted by crcarleREMOVETHIS

10 comments posted 18yrs posted by crcarleREMOVETHIS

Connecting buttons with MSP430F2013 for Input Output with software

Hi! I want to connect 5 buttons with the MSP430F2013 MCU . I want to use the buttons for input with a software . Please...

9 comments posted 18yrs

posted by anmolanand

9 comments posted 18yrs posted by anmolanand

how to prevent timer code firmware running on Microblaze from being optimised

Hi, I am trying to do the following on Microblaze. Here is the program structure. void main() { Xuint32 countvalue; ena...

11 comments posted 18yrs

posted by chrisdekoh

11 comments posted 18yrs posted by chrisdekoh

Programming AVR from ARM using CAN Bus interface

Hello to all, I'm looking since many days something about my problem without fin nothing interesting so I'm going to po...

3 comments posted 18yrs

posted by danpidal

3 comments posted 18yrs posted by danpidal

What Serial Link to use

Hi All, I am a novice in Embedded and looking for inputs on the Basi characteristics of serial protocols that will help...

6 comments posted 18yrs

posted by jpeeyush

6 comments posted 18yrs posted by jpeeyush