Looking for USB hub with ULPI upstream port

Hi I have a microcontroller that I'm considering using for a new design. It has a USB controller with a ULPI interface that requires an external USB transceiver to connect to the USB DP and DM signals.

The chip has one ULPI but my application needs two USB host ports, so I need to use a USB hub. I can find USB hub chips. I can find USB transceiver chips as well (to convert ULPI to USB), but I can't find a single chip solution that will do both - ie. is a hub with a ULPI upstream port.

My application doesn't have extreme limits on size or cost, so a 2 chip solution would be ok, but I would prefer to use one part rather than two.

I've tried the USB usual suspects: SMSC, ST-Ericsson, ST, TI, NXP, Renesas, etc. but can't find anything.

Any ideas?

BTW, it must do USB 2.0 "High-Speed" i.e. 480Mb/s. I just need host ports; there is no need for OTG.

Thanks, Allan

Reply to
Allan Herriman
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.