atmel arm

Look at Olimex's JTAG adapter. Also look at Rowley's low-cost ARM USB JTAG pod.

You might want to invest in a few "," and "." in your paragraph.

For example:

Have a look at

Nice tool for : - ARM debugging with OpenOCD and Rowley Crossworks - Flash Programming - AVR programming - Altera FPGA / CPLD programming - Lattice FPGA / CPLD programming - Xilinx FPGA / CPLD programming

JTagkey is faster : 450ms to programm a Spartan2 200 via JTAG.

The JTAGkey knows auto-sense of the JTAG IO port from 1.4V to 5.5V !

..

Is there a way to programm AVRs via JTAG with the JTAGkey?

-- Uwe Bonnes snipped-for-privacy@elektron.ikp.physik.tu-darmstadt.de

Institut fuer Kernphysik Schlossgartenstrasse 9 64289 Darmstadt

--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------

Yes, using Atmel avrsvf and Amontec amtsvfplayer (SVF Player).

From your .hex, could be scripted as: avrsvf.exe your_avr_program.hex amtsvfplayer.exe -svffile your_avr_program.svf

Note: The Amontec SVF Player accept RELATIVE scans to ABSOLUTE scans easy migration. Example : you build your relative .svf file from the avrsvf, then you insert this relative .svf in an multi-device JTAG chain. For this, please use:

Example for a JTAG chain like: JTAGkey TDI -> coolrunner -> coolrunner -> avr -> coolrunner -> JTAGkey TDO amtsvfplayer.exe -svfFile your_avr_program.svf -headerTapNum 1

-headerIRLength 5 -trailerTapNum 2 -trailerIRLength 10

Note: our amtsvfplayer comes as a free open project, in the goal to give a concret example of the how-to-use the amtxhal (Amontec Hardware Abstraction Layer) amtxhal comes for - Windows, - Linux and - GYGWIN under Windows - MinGW/MSYS

Works great and really fast (faster than many other USB full-speed JTAG interfaces) More from

We are working on the integration of amtxhal (JTAGkey) in AVRUDE tools.

Laurent

--off topic --sorry-- Larry, Can "chameleon POD" be used for powerpc debugging /on board flash programming? Does it work with USB-Parallel port emulators? Is it supported When do you think usb version (usbiplatform) is going to be ready ?

thanks

may

thank you linnix but this does not solve any problems but my grammarcan w please stay on the subject .

larry ,

thanks for the sugestion for a programmer . i will look into getting thi instead of the jtagice mk2, but it is more exspencive to send it t australia than it is to buy.

i will have to see if i can find it available in Australia.

thnak you again

Linnix is being helpful. When your message is a jumbled mess many readers will simply skip it. Adequate grammer and spelling (such things as capital I for the first person pronoun) will help greatly. Also please do not delete attributions for material you quote.