Netzwerkanalysator und C-Messung

Hallo,

kann jemand aus den technischen Daten dieses R & S ZNB20 erkennen mit welcher Genauigkeit man Kondensatoren messen kann?

formatting link

S-Parameter: Magnitude 0.04 dB Phase 0.4 Grad

Funktionen zur Umrechnung der S-Parameter in Z-Parameter ? Z11:=(S11,S12,S21,S22)->Z0*((1+S11)*(1-S22)+S12*S21)/((1-S11)*(1- S22)-S12*S21): ? Z12:=(S11,S12,S21,S22)->Z0*2*S12/((1-S11)*(1-S22)-S12*S21): ? Z21:=(S11,S12,S21,S22)->Z0*2*S21/((1-S11)*(1-S22)-S12*S21): ? Z22:=(S11,S12,S21,S22)->Z0*((1+S22)*(1-S11)+S12*S21)/((1-S11)*(1- S22)-S12*S21): ? DZ :=Z11*Z22-Z12*Z21: ? ZIn:=(z11,z12,z21,z22,zL)->(Z11*ZL+DZ)/(ZL+Z22):

Reply to
Leo Baumann
Loading thread data ...

Am 26.06.2022 um 11:03 schrieb Leo Baumann:

Wenn ich die Toleranz von 0.04 dB (1.00461579) und 0.4 Grad in die Funktionen einsetze komme ich auf eine Abweichung der Impedanz ZIn=-2.9165+i*246.6246 Ohm.

hmmm ...

Reply to
Leo Baumann

Am 26.06.2022 um 11:03 schrieb Leo Baumann:

Wenn ich den Fehler von 0.04 dB (1.00461579) und 0.4 Grad in Z11 einsetze bekomme ich als Ergebnis ...

Z11=-31.8404+i*29.2878 Ohm

hmm ...

Reply to
Leo Baumann

Am 26.06.2022 um 18:13 schrieb Leo Baumann:

Kein Kommentar?

Reply to
Leo Baumann

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.