Four en DIY?

Bonjour,

5x par an. Chaleur tournante serait un plus...

quoi).

PID+relai+sonde = ebay.com 280879156946

formatting link
Fil resistif = conrad 421201
formatting link

Comment calculer la longueur du fil et vaudrait-il mieux utiliser autre chose pour chauffer (quoi?).

franssoa

Reply to
franssoa
Loading thread data ...

l'importance.

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

ne crains pas la chaleur...

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

La paroi du four ne craindra rien. Effectivement il va falloir que

utiliser ?

Si on prend 20A en 230V = 230/20 = 11.5 ohms Longueur utilisable = 11.5/0.23 = 50m Puissance 230*20A=4600 watts

Est-ce juste ou j'ai tout faux ?

franssoa

[1]
formatting link
Reply to
franssoa

solution a mon avis.

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

Pour ces instruments, la position verticale me semble meilleure avec un plateau tournant.

surface avant de laquer.

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

formatting link

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

P = U x I U = R x I

I = U/R

U = R x I

Oui puisque tu divise par R a tension d'alimentation constante

Reply to
Pascal-J

changer d'aspect.

--
http://www.assemblee-nationale.fr/histoire/jaures/discours/responsables-guerre_25071914.asp 
https://www.youtube.com/watch?v=EUoxRR5aRlI 
 Click to see the full signature
Reply to
Philippe

devrai pas etre importante, l'inertie si mais c'est plus un bien qu'un mal.

laine de roche ce n'est pas un gros soucis.

Reply to
Pascal-J

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.