John Fields found this link:
I think it will show the answer to your question.
Bill
John Fields found this link:
I think it will show the answer to your question.
Bill
-- Better yet: http://www.minicircuits.com/app/AN10-006.pdf
Thanks John, that one does indeed seem to answer my question. If the device is properly designed then sending a signal into the 2 outputs (now inputs) will cause a signal at the input port that equals (input1 - 3dB) + (input2 - 3dB). And there will be no output from either of the 2 input ports. That of course assumes ideal conditions which probably don't apply, but at least the results will be in that ball park.
I can see that you have a lot more patience with Google than I do. When I see a long list of things in the search results that don't apply I give up pretty quick.
Thanks Again.
Bill
A resistive splitter will have a theoretical minimum 6dB loss. 3dB from the split, and 3dB from resistive losses.
-- "For a successful technology, reality must take precedence over public relations, for nature cannot be fooled." (Richard Feynman)
ts.
.boost
ing on
dof
Thanks Bill, When I saw the magic T, I thought it was about one of these gizmo's
George H.
uts.
n.
B boost
ting on
nd
of
Ahh, Thanks John, The two transformers are as shown in figure 4, One for impedance matching and the other to do the splitting. (?)
George H.
Well, I have worked with RF circuits at one time, and may even have come in contact with one of those things upon a time, but it has been a while, and I have forgotten most of that sort of thing.
Bill
Fred Abse Inscribed thus:
Agreed !
-- Best Regards: Baron.
T24gT2N0IDMxLCA0OjM4wqBhbSwgSmFzZW4gQmV0dHMgPGphLi4uQHhuZXQuY28ubno+IHdyb3Rl Ogo+IE9uIDIwMTEtMTAtMzAsIEJpbGwgR2lsbCA8YmlsbG5lLi4uQGNveC5uZXQ+IHdyb3RlOgo+ Cj4gPiBNeSBtYWluIHRoaW5nIHdhcyB0aGF0IEkgYW0gY3VyaW91cyBqdXN0IGhvdyB0aGUgc3Bs aXR0ZXIgd29ya3MuCj4KPiDCoCDCoCBsYXN0IG9uZSBpIGxvb2tlZCBpbnNpZGUgaGFkIHRoaXM6 Cj4KPiDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoC4tLS0tLS0tLS0g wqBvdXQxCj4gwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqB8X18KPiDC oCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCAzOjoKPiDCoCDCoCDC oCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCAzOjoKPiDCoCDCoCDCoCDCoCDC oCDCoCDCoCDCoCDCoC4tLS0tLS0tLS0tLS0zOjoKPiDCoCDCoCDCoGluIMKgIMKgIMKgIMKgIMKg fCDCoCDCoCDCoCDCoCDCoCDCoDM6Ogo+IMKgIMKgIMKgIMKgLS0tLS0tLS0tLXwtLV9fIMKgIMKg IMKgX18zOjoKPiDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoCDCoHwgwqAgwqAzOjogwqB8Cj4gwqAg wqAgwqAgwqAgwqAgwqAgwqAgwqAgwqArLS0tLTM6OiDCoGAtLS0tLS0tLS0gwqBvdXQyCj4gwqAg wqAgwqAgwqAgwqAgwqAgwqA3OjEwIMKgIMKgIDM6Ogo+IMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKg IMKgIMKgIMKgIDM6Ogo+IMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKgX19fMzo6Cj4gwqAg wqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgfAo+IMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKgIMKgPT09 IDEwbig/KSBjZXJhbWljCj4gwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgwqAgfAo+IMKgIMKgIMKg LS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLS0tLQo+Cj4gwqAgwqBJJ20gbm90IHN1cmUg aG93IHRvIGFuYWx5c2UgdGhhdC4KPgo+IC0tCj4g4pqC4pqDIDEwMCUgbmF0dXJhbAo+Cj4gLS0t IFBvc3RlZCB2aWEgbmV3czovL2ZyZWVuZXdzLm5ldGZyb250Lm5ldC8gLSBDb21wbGFpbnRzIHRv IG4uLi5AbmV0ZnJvbnQubmV0IC0tLQoKVGhhdCBsb29rcyBsaWtlIGZpZ3VyZSA0LiBpbiB0aGUg YXBwIG5vdGUgdGhhdCBKRiBwb3N0ZWQuICBJcyB0aGVyZSBhCnJlc2lzdG9yIGFjcm9zcyB0aGUg b3V0cHV0cz8KCkdlb3JnZSBILg==
no resistor. it was cheap one, hard, brittle plastic shell, "PAL" connectors made from pressed steel arranged with their axes in a Y formation zinc plated steel skeleton, no pcb, just bits soldered together.
It woked sort of, but there was interferance between the output ports, put the tv on one channel ad the stuff on the opther port would get noise on a different channel adding that resistor would have no doubt helped, but back then I'd not even heard of a hybrid. only knew how to solder it back togethern after someone tripped over the antenna lead, or jammed it against the wall etc.
-- ?? 100% natural
--- Posted via news://freenews.netfront.net/ - Complaints to snipped-for-privacy@netfront.net
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.