1000mA 12 V ac supply

Nov 20, 2005 5 Replies

Hi, I need 1000mA 12V ac output from 240V ac. It is for an audio signal processor, Will a step down transformer be sufficient, as AC is sin wave, or do I need to clean the signal in any way.



Where do I source components?


Thanks



Thanks Jim

Jim Gregory wrote:

Yes, a step-down tranny, at least of 12 VA rating, but add 20% to that to run cooler. That's all. If you live in UK, mains is officially 230V AC, by the way. Try Farnell Electronic Components, Maplin, or Rapid Electronics. Jim

Actually it's quoted as 240V in the UK, and 220V in France. But I had heard that they had made them all within a certain band, so they were all the same throughout Europe, so suppliers can proably get away with quite a wide range nowadays.

http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com Sky have just won the rights to screen the first World Origami Championships from Tokyo. Unfortunately it\'s only available on Paper View.

yes.

probably not.

Pretty much any "electronics" retailer will have a transformer-plug (AKA wall-wart) with 12V AC output. some will have "bare" transformers in their parts section.

my spare modem uses a 12V AC 1A wall-wart. (1A is 1000mA)

Bye. Jasen

Cheers Jason, I got a old transformer rated 12volts I'll give it a go

Joseph Jasen Betts wrote:

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required