Sanyo eneloop "ready to use rechargeable battery"

Jun 05, 2010 4 Replies

Ciao a tutti



Qualche giorni fa ho acquistato 4 batterie AAA Sanyo eneloop "Ready to use Rechargeable Battery" da "800mAh, min.750mAh" (così sta scritto). Quando sono andato a caricarle per la prima volta con il mio caricabatterie ho visto sul display che 3 avevano accumulato circa 200mAh (25% della capacità dichiarata, quindi avevano il 75% di energia residua), mentre l'altra ben



735mAh (meno del 10% di energia residua!), cioè praticamente tutta la capacità dichiarata. Ciascuna delle 4 batterie è marcata 08-11-HT; sul retro del cartoncino della confezione c'è scritto 2008 11 per esteso. Dovrebbero essere state prodotte 1 anno e 7 mesi fa quindi le 3 sembrano rispettare l'autoscarica dichiarata sulla confezione, cioè 85% di energia residua dopo un anno, mentre l'altra era quasi completamente scarica.

Nel pomeriggio ho scritto al venditore e più tardi mi ha risposto. Che ne pensate?



Grazie Gianluca



N.B.: lui dice: "The charge in them when first removed from the pack is we understand it is from the manufacturing process rather than from a charging process." e "most manufacturers do not gaurantee their batteries except Ansmann". Sì, sulla seconda siamo d'accordo, ma sulla confezione dice "precaricata" "Ready to use"... Non è che non voglio caricarle la prima volta (voglio la "corrente" gratis... :-)) ma mi chiedo se nell'uso potrò farci affidamento oppure no...


Gli ho scritto:



Gentile lookandsave1,



Hi, I received the batteries. I have charged them using a charger with LCD display like this:

formatting link



At the end of charge on the LCD I read about 200mAh for 3 batteries, but



735mAh for the other one. That is the energy loaded in the batteries, then 3 of them had 75% of the initial energy. It is comparable with the declared
85% after 1 year, but the last one had about no residual energy. Does it have a higher self-discharging? All 4 batteries are marked 08-11-HT, then I think are 1 year and 7 months old.


Mi ha risposto:



Hi, Independant tests show that pre charged batteries work best after an initial charge. The charge in them when first removed from the pack is we understand it is from the manufacturing process rather than from a charging process. If all 4 batteries have charged up OK then see if the one odd one discharges earlier or faster than the other 3. If the battery is shown to be faulty in use we will replace it(most manufacturers do not gaurantee their batteries except Ansmann. Hope this helps. Regards lookandsave1



"LAB" ha scritto nel messaggio news:4c0adcb0$0$6841$ snipped-for-privacy@news.tiscali.it...

Con quale corrente hai caricato le batterie? I contatti sono puliti? Vedo che il caricabatterie segnalato supporta la carica e la scarica a diversi livelli di corrente selezionabili; prova a fare un paio di cicli scarica a 350 mA / carica a 500 mA e vedi se i valori si stabilizzano. Se noti che con una corrente di 500 mA le batterie scaldano > 35/40°, potrebbero essere difettose (resistenza interna alta). Se le batterie sono nuove ed efficienti non devono scaldare.

Ciao

Alessandro

Le ho caricate a 250mA per avere una carica completa in circa 5 ore, che mi sembra il giusto compromesso. Da molto tempo uso quel caricabatterie. Ciò che temo, dato che per gli altri tre ho avuto gli stessi valori (+/-

20mAh) è che quell'elemento abbia una auto scarica più elevata del previsto. A questo punto l'unica prova che posso fare è utilizzare solo due delle tre, lasciando da parte quella sospetta ed una buona per confrontarle tra un po' di tempo...

Grazie.

Ciao

Gianluca

Le ho acquistate dal venditore di Ebay lookandsave1. 4 ministilo AAA le ho pagate 10,30 GBP spedizione compresa.

Il caricabatterie è come questo:

formatting link

Che cosa pensi di ciò che ho scritto nel post originale?

formatting link

Gianluca

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required