replacing a battery

The battery in my phone burned out, so I ordered a replacement from Amazon. Examining the case, I can't find any fasteners. Do I open it with an oyster knife?

Reply to
RichD
Loading thread data ...

Check YouTube. It's surprising how many people put how to videos on it. Rumble might have some too.

Reply to
Dean Hoffman

A sharpened paint scraper is the unofficial tool of choice.

Be careful though missing fingers are hard to replace.

Reply to
Martin Brown

RichDickhead wrote: ===================

** The make and model a govt secret - right ?

** You will need a bit of heat to soften the glue and a lot of patience. iphones were never designed to be repaired.

You Tube is your friend.

.... Phil

Reply to
Phil Allison

If you want to make an "official tool purchase" to ameliorate the lawyers, buy a "spudger" on fleabay or amazon :) E.g.

formatting link

Yup :)

Reply to
Tom Gardner

I recently had to replace the timer on our clothes washer. I would have really messed up without YouTube.

Reply to
jlarkin

It may take a while to find it, but Youtube has repair/replace for allmost anything that has been made. Ioften go there even if I think I know that to do as there is often a small bit of information that makes the job much easier. YOu do have to pay attention as some of the advice will really mess up you item as some do not know what they are doing.

Reply to
Ralph Mowery

On Wednesday, 6 October 2021 at 01:53:48 UTC-7, snipped-for-privacy@gmail.com wrote: ...

... iPhones use screws, they are special screws but the matching screwdrivers are easy to get these days.

kw

Reply to
ke...

Not sure what version but here is a place you can get a kit fro about $

30 including the battery to do the job. There is vidio on how it is done. From a quick look you force it open and there are screws inside to hold some things in.

formatting link

Reply to
Ralph Mowery

Maybe you are talking about an Apple 'phone made by slave labor in Communist China..

Reply to
Robert Baer

A friend had a German made coffee machine that had crapped out. He took it apart and found a video that claimed a common failure was a particular power transistor. He asked me to help and I found a suitable replacement and soldered it in. I tried to emphasize how important it would be to take pictures of every connector (there were plenty) so we could get it back together. He slap dashed the pictures and it took us some time to gain enough confidence of the wiring to turn it on. It worked and the wife was again happy.

Reply to
Rick C

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.