North American Ferrite core supplier for prototypes

Spehro Pefhany · 2005-06-02T05:29:50+00:00

Any suggestions for a North American supplier with a good onlinepresence? Tiny to large E/RM/Pot core etc. Most of the distributors and agents seem to have high minimum orders,no online stock checking, no online ordering etc. etc. just like inthe 1970s. There's one within 15 minutes of my office, plenty ofstock, but they want C$100 per *line item* minimum order (clamps,bobbins and cores are 3 line items...). The only thing that seems to have changed with the internet is all thedata and application notes are now online. I don't want to deal withsurplus houses, the product needs to be known brand name stuff thatcan be had in production quantities. Joerg? Best regards, Spehro Pefhany-- "it's the network..." "The Journey is the reward" Info for manufacturers: software/hardware/analog Info for designers:

Jun 02, 2005 42 Replies

Rate this thread:

Joerg 21 years ago

Hello Graham,

Depends on the power and DC load. There are pot cores where you almost need a small crane to install them ;-)

Regards, Joerg

formatting link

Vote

Joerg 21 years ago

Hello Graham,

No :-)

Once the top half accidentally slid off and hit my hand. I sported a blue/black thumb nail for months.

Regards, Joerg

formatting link

Vote

Pooh Bear 21 years ago

Not the RM series then ?

Graham

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required