Do your own research, google has all these answers.
Wigan, Wisconsin, Warsaw, Wellington, Wales, and some other places.
Coupling capacitors are used to connect things together, like trains. Decoupling capacitors are used to separate over- ardent teenagers.
A pull up resistor is used to make the handling of heavy PCBs (qv) easier. A pull down resistor is for plucking ducklings.
The dancer applies a rhythmic load to check for resonances.
Transport used by the Parti Communiste Internationaliste to get to rallies.
Hey, Dummy! Don't go away mad, just go away! PLONK!
...Jim Thompson
-- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | |
where resistiance capacitance or inductance is wanted.
coupling capacitors carry wanted dignals between circuit blocks, decoupling capacitor route unwanted signals elsewhere,
pull up connects signal to a higher voltage, pull down to a lower voltage, typically used where the input is single ended. to convert it to double-ended.
So you can test ciurcuts without risking the helecopter, perhaps.
Personal computer interconnect, inside PC.
Bye. Jasen
Have something to add? Share your thoughts — no account required.
Ask the community — no account required