REQ: Info on SCK 058

I found a reference pdf at

Thanks anyways.

- Tim -

The proper URTL for the datasheet is

07/2009719171135515.pdf

Hope it helps someone in the future

- Tim -

Any number of manufs for Inrush Curreent Limiters eg.

Just select a similar rated device for any locally available substitute.

:The proper URTL for the datasheet is : :

:07/2009719171135515.pdf : :Hope it helps someone in the future : :- Tim - : :In article , snipped-for-privacy@tim.tim :says... :> I found a reference pdf at :> :> :> :> Thanks anyways. :> :> - Tim - :> :> In article , snipped-for-privacy@tim.tim :> says... :> > I am looking for info on a part from a switching power supply. The :> > legend on it is SCK 058. I think it may been a power thermistor, but I'm :> > not sure of the values. This one is definatly defective, as it has a :> > hole burned through to the outside. I suspect the magic smoke got out. :> > :> > I have posted a pic at this URL; :> > :> > :> > PB/PowerThermistorFromKodakPrinter.jpg :> > :> > Any info would be greatly appreciated. Usual datasheet searches came up :> > empty. :> > :> > Thanks, :> > :> > - Tim - :> > :> > -- :> > :> :>

There would be quite a difference between SCK 058 and any of the parts on the data sheet you've referenced. Using their part designation, it would be 5R, 8A.

Perhaps you've misread the number. It will not need a current rating in excess of that supported by the input fuse. The diameter is an indication of surge capacity - larger diameters support larger capacitor sizes at higher line voltage.

RL