The September issue was supposed to include a free LED driver PCB - mine didn't!
Can anyone describe to me how it was attached? This is not the first time Elektor has arrived sans freebie and as usual the newsagent vigorously denies any knowledge of it - I'm starting to suspect foul play!
TIA.
"ian field" schreef in bericht news:fV_zi.21900$ snipped-for-privacy@newsfe4-win.ntli.net...
Well, the picture is on the cover and the description inside. The pcb measured roughly 16x11mm and most of them had the top of the coil damaged. It was packed in a just fitting, plastic bag which was glued to the cover. As the issue itself - including the pcb - was wrapped in its plastic it is unlikely it get lost accidentally.
petrus bitbyter
I would suggest if the magazine wasn't in the plastic cover/envelope, you contact the publisher. They won't be happy if the magazine has been tampered with after publication and distibution.
Don...
-- Don McKenzie Site Map: http://www.dontronics.com/sitemap E-Mail Contact Page: http://www.dontronics.com/email No More Damn Spam: http://www.wizard-of-oz.com Serial OLED uses standard micro-SD memory cards. http://www.dontronics-shop.com/product.php?productid=16659 USB Flash Drive interface for existing products. http://www.dontronics-shop.com/product.php?productid=16654
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.