Hi, I'm currently having problem with the PCB trace length matching... I already set-up the 'Match Length Rule' and click on Tools>>Equalize Net Lengths. but still nothing happens? I've intentionally pre-routed the nets to be unequal in length to see if its works... Any suggestions? --yy
Question for Altium Designer Users....
Oct 11, 2006
1 Replies
Try unrouting at least a portion of the traces. If they are completely routed I am not sure that the command will do anything, afterall it is basically a router function. It probably should because you have to run it over several iterations when I believe it would be routed after each iteration. Are the traces you routed "locked", so the router won't touch them? Many possibilities but I can't answer them for you because I don't use that function, nor the newer software.
Other than that, read the PDFs under the Help/About menu and go online to Altiums site and check their PDFs and white papers. Failing all else, register on their users forum, you will probably get your answers inside of
1 hour through their user forum. If you just ask your question here every couple of weeks you may never get an answer.
Sincerely,
Brad Velander.
"yy7d6" wrote in message
news:1160596638.280556.118070@b28g2000cwb.googlegroups.com...
> Hi, I\'m currently having problem with the PCB trace length
> matching... I already set-up the \'Match Length Rule\' and click on
> Tools>>Equalize Net Lengths. but still nothing happens? I\'ve
> intentionally pre-routed the nets to be unequal in length to see if its
> works... Any suggestions? --yy
>
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required