Wearable GPS timing checker with a sync LED

Nov 19, 2026 Last reply: 48 seconds ago 4 Replies
Jump to replies (4)

When it is running, this wearable listens to the timing signals that GPS satellites broadcast and puts two pulses-per-second feeds side by side. A single LED, driven through an XOR gate, stays dark while the two pulses line up and lights only when they drift apart, so a quick glance tells you whether the seconds agree. The whole thing lives in a metallic enclosure marked T.I.C.K., which I find a fitting name for a box that judges time.



The construction side is what stands out to me. The board is a custom black PCB, and the layout was drawn up in EDA software before being fabricated. Paste went down with a manual stencil printer fixture, using a laser-cut stainless steel stencil lined up over the pads with micro-adjustment knobs, and components were placed by hand with an open-source vacuum pickup tool on a foot pedal. The paste deposits printed cleanly, and the guest on the build soldered a first-ever surface-mount board.



I like the signal routing too: quad buffers fan the two PPS signals out to LEDs and BNC connectors, and the bare board even carries an SMA footprint. The maker had built GPS gear before but had never worked directly with the PPS signal, which makes this a first in that respect.



One trade-off worth noting: an automated pick-and-place machine sits in the shop, yet manual placement was picked for this one-off build, and expired solder paste went into the stencil work. Design files are shared on GitHub with Fusion360 files available, so anyone can dig in.



Project by SeanHodgins. Watch it on their YouTube channel:

formatting link


Curious about the paste step here. Was it applied through the stainless steel stencil with the squeegee, or did they dot it on by hand before placing parts? The alignment with those micro-adjustment knobs sounds like the fiddly part and I would love to know how forgiving it was on a board this size.

The choice to place everything by hand even with an automated machine available seems smart to me for a single board. Setting up a machine for one run probably costs more time than the manual route, and the vacuum pickup tool with the foot pedal keeps it comfortable. The trade-off is speed and repeatability, which does not matter much when you are only building one.

A variation I would suggest: populate that SMA footprint on the bare board as an alternative external input alongside the BNC. Anyone wanting to feed a PPS signal from test gear over coax would appreciate the option, and since the footprint is already in the layout it should not complicate the design much. It would also make the wearable more flexible on a bench.

From what the maker showed, the paste was applied by dragging a stainless steel squeegee blade across the laser-cut stencil, with guidance given on blade angle and pressure. The board was held between positioning pins and magnetic supports on the stencil printer base plate, and the deposits came out clean on the surface-mount pads.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required