Hello, i have a board with LPC2478 and 320x240 STN LCD. The LCD mode is set to 4bpp, Mono, STN, Little Endian byte and pixel order. I have initialized the palette with these values:
b31 b0 hex address
0b0000000000000010 0000000000000000 0x00020000 0xFFE10200 0b0000000000000110 0000000000000100 0x00060004 0xFFE10204 0b0000000000001010 0000000000001000 0x000A0008 0xFFE10208 0b0000000000001110 0000000000001100 0x000E000C 0xFFE1020C 0b0000000000010010 0000000000010000 0x00120010 0xFFE10210 0b0000000000010110 0000000000010100 0x00160014 0xFFE10214 0b0000000000011010 0000000000011000 0x001A0018 0xFFE10218 0b0000000000011110 0000000000011100 0x001E001C 0xFFE1021CAm i right to think that with these palette settings the most "white" pixel will be the one with value 0x0 and the most dark with value 0xF? The datasheet doesn't say anything about palette to pixel intensity mapping so that's why i am asking here. I wrote a test program that shows the different gray shades, and the most "white" is with pixel value 0x6 , the one with 0x0 is actually quite dark Which doesn't seems right to me :|