Raspberry Pi Group

Remote access problems

I now have my RPi installed as a headless server with .Remote Desktop Viewer' providing the VNC connection. This workes...

1 comments posted 8yrs

posted by jack

1 comments posted 8yrs posted by jack

Raspberry Pi node red flow editor very slow when using Modbus

Hello. I have dropped this issue in the node red group with no resolution. Hoping someone has had the same issue and ca...

46 comments posted 8yrs

posted by danieljamessmith1979

46 comments posted 8yrs posted by danieljamessmith1979

pl2303_get_line_request - failed: -32

I'm trying to use a pl2303ta usb-serial adapter with a nulsom ns-rs232 level shifter. The goal is to connect an RPi3 to...

12 comments posted 8yrs

posted by bp

12 comments posted 8yrs posted by bp

Handbook

I am a handbook man. I find it easy to remember technical details I've seen on paper in writing. That's how I learnt La...

11 comments posted 8yrs

posted by Spam

11 comments posted 8yrs posted by Spam

Capturing a remote controls IR signals - timing is sometimes wildly off.

Hello All, I'm currently capturing a remote controls IR by using an IR reciever module and edge-triggered ISR callbacks...

2 comments posted 8yrs

posted by address

2 comments posted 8yrs posted by address

screen resolution as headless server

I am new to the raspberry pi but not to Linux. My plan is to connect to the Raspberry Pi through VNC but with no screen...

40 comments posted 8yrs

posted by jack

40 comments posted 8yrs posted by jack

Absolute beginner on RasPi WiFi

Hello! : a stupid question: I would like connect my RasPis in domestic lan, using only the "hostname" of RasPI, not his...

9 comments posted 8yrs

posted by smach

9 comments posted 8yrs posted by smach

Monitoring RPI3 serial console

What are the correct settings on an RPI3 to watch the serial console using a pl2303TA usb-serial cable? In this case, t...

3 comments posted 8yrs

posted by bp

3 comments posted 8yrs posted by bp

Moode Audio

Has anyone tried Moode Audio ? I wish I could report on it - but I haven't even been able to get it set up and installe...

5 comments posted 8yrs

posted by real-not-anti-spam-address

5 comments posted 8yrs posted by real-not-anti-spam-address

Re: NVIDIA is gearing up to end 32-bit OS support

> > > > > Full story: > > > > > > > > If you haven't upgraded to a 64-bit operating system, you might > > want to soon....

8 comments posted 8yrs

posted by nospam

8 comments posted 8yrs posted by nospam

Where may I find the data sheet for the BCM2837?

Where may I find the data sheet for the BCM2837? -- Do, as a concession to my poor wits, Lord Darlington, just explain...

1 comments posted 8yrs

posted by peterxpercival

1 comments posted 8yrs posted by peterxpercival

[raspbian geneweb 6.05 gwsetup] where to put only.txt ?

Hello all geneweb users and others, My pc is at 192.168.1.11 and the geneweb server is running on my raspberrypi at 192...

6 comments posted 8yrs

posted by geo.cherchetoutsanspam

6 comments posted 8yrs posted by geo.cherchetoutsanspam

For the I2C-1 "file", is it possible to set/send the port address seperatily ?

Hello All, When I open /dev/i2c-1 and want to send some data to a certain port on the target device I currently always...

37 comments posted 8yrs

posted by address

37 comments posted 8yrs posted by address

Using a Phone Like a Pi

This is much cheaper than buying a pi along with a display, touch screen, battery, power supply, etc. MUCH cheaper. Can...

31 comments posted 8yrs

posted by gnuarm

31 comments posted 8yrs posted by gnuarm

Raspberry Pi hi-fi update

A few weeks ago I described a music source I put together: * Raspberry Pi * Raspberry Pi 7" touch screen * Volumio soft...

14 comments posted 8yrs

posted by real-not-anti-spam-address

14 comments posted 8yrs posted by real-not-anti-spam-address