Raspberry Pi Group

2091 Threads Posts
to

Raspberry Pi Zero 2 W

Is there any way to run the older "Buster OS - Lite" on the new Raspberry Pi Zero 2 W? I have tried an SD image that ha...
2 comments posted 4yrs
posted by somedude
2 comments posted 4yrs posted by somedude

libxcb1 install problem

Hello, I'm Hans-Werner an running multiple PIs. After upgrading two of them Raspbian from Buster to Bullseye one is goo...
21 comments posted 4yrs
posted by hans-werner.kneitinger
21 comments posted 4yrs posted by hans-werner.kneitinger

Mixing USB device speeds on Pi4

It would be handy to plug a USB2 device into one of the USB3 ports on a Pi4. The machine has a keyboard, mouse and FTDI...
1 comments posted 4yrs
posted by bp
1 comments posted 4yrs posted by bp

Free 300-MHz boost for your RPi 4 with Bullseye

Depending on the SoC on your particular Raspberry Pi 4, the latest Raspbian might kick it up to 1.8 GHz: https://invidi...
2 comments posted 4yrs
posted by scott
2 comments posted 4yrs posted by scott

MLTP - My Little Temp Project :-)

Hi, I have a Raspberry Pico which is without any job. So I decided to do a little project without much time. The pico s...
5 comments posted 4yrs
posted by me
5 comments posted 4yrs posted by me

Power Fail?

I read with interest the uses to which other subscribers put their Raspberry Pis, especially those with a whole stable...
2 comments posted 4yrs
posted by headstone255
2 comments posted 4yrs posted by headstone255

zero w vs zero 2w

Hi *.*, There's a RPi zero w (1W) and a RPi zero 2w (2W). Both can boot from the same (not a clone, physically the iden...
39 comments posted 4yrs
posted by stefan
39 comments posted 4yrs posted by stefan

rsyslog config

Hi, how can I prevent dhcpd logging each REQUEST and ACK it receives to the syslog? Cheers, Tony
3 comments posted 4yrs
posted by tony
3 comments posted 4yrs posted by tony

any books

Hello, Is there any book covering Rapsbian 'internals' describing system's call, interrupts handling, IO's etc etc There...
2 comments posted 4yrs
posted by pasIci
2 comments posted 4yrs posted by pasIci

timer interrupt

Hello, I am looking for information and example on programing a led that's is on / off every second, based on a 'timer'...
28 comments posted 4yrs
posted by pasIci
28 comments posted 4yrs posted by pasIci

Python Autostart (Pico)

Hi, (how) can I force the Pico to start my Python-program when connected? FW (Python Beginner)
2 comments posted 4yrs
posted by me
2 comments posted 4yrs posted by me

Which process wakes-up USB-drive?

Hi *.*, I use a RPi4 with an external USB-HD as backup solution. It runs restic on pi:~ $ uname -a Linux resticrepo 5.1...
4 comments posted 4yrs
posted by stefan
4 comments posted 4yrs posted by stefan

Yoicks ! ! ! ! ! ! ! ! !

Multicore 64 bit processor and 1/2 GB RAM for £15 ! ! ! ! ! !! When I set out as an assembly software engineer on a PDP...
87 comments posted 4yrs
posted by headstone255
87 comments posted 4yrs posted by headstone255