Alarm activates for no apparent reason engineer replaced battery an fuse, said fuse had blown and battery was low so replaced them bot still having same problem red tamper light lights up, can anyon email installation manual Mac osx use
Veritas R8 burgular system problem
Mar 19, 2005
2 Replies
Alarms are a touchy subject. You are usually unable to get public help, as there is no way to know if you are a legitimate owner, or someone trying to defeat one.
Alarm system are a security issue. They do not supply any tech information to non authorized service reps.
Call back your alarm service rep for proper repairs.
These systems are modular, and are serviced at the modular level. The power supply board may have to be changed, or the monitoring module may be defective (depending on the exact nature of the fault).
If you have a zone that is giving a false indication, this may be the wire or connection to that zone device that is defective, or the device itself. As for myself, I have had the occasional failure of a motion detector, or a module, or something along that line.
Jerry G. =======
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required