Hi,
>
> I use to be in consumer electronics repair service for many years.
>
> My Philips "Docking Entertainment System" Model DCM230
>(Ipod(s) dock, USB port for USB flash drives, CD player, AM/FM
>radio, plus Aux input) has a problem with the CD player. I found
>out that the CD motor is not spinning the CD after it is loaded.
>The motor is not "stuck".
>
> After inserting a CD, the display keeps displaying "Reading", "Reading",
>...... This can go on for a long period of time without an error message!
>
> Did anyone have this same issue with your Philips DCM230/37 model
>system?
>
Hi,
Above is from my original post a couple months ago.
I received responses and was told the problem may be the laser pickup. I wasn't convinced that it was since I did not use the CD player often.
Recently I inserted a CD and of course the endless "Reading, Reading...." occurred. I decided to let it continue and left the room. An hour or more later, I noticed the unit turned itself off. The next day I decided to try again, but to my surprise, after a short period of "Reading", the display changed to a tracks count. I pressed the "Play" and by golly, it works!!!
"Loose what you don't use for a long time". I made up my mind that I will use the CD player more often. My problem occurred after a very long period of not using the CD player. I remember when doing service work, I serviced a turntable(s) or VCR(s) that was not used for a very long time by a customer(s). John