Silly USB connection "repair"

The annoying situation , due to thousands of make/break connection to a laptop and eventual wear. Where , despite cleaning of contacts, movement of the cable often breaks contact. A small piece of that protective slide of a 3in floppy disk, cut to L in cross section and wide enough to feed in the "gap" between USB line plug plastic slab of insulation and the metal shroud. So the short return part of the L is against the end of the plastic slab, just enough width to act as an end stop to loosing fully in the gap. May of course accelerate failure of the chassis socket part , but at

0.15mm thick metal , perhaps not, we'll see.
Monthly public talks on science topics, Hampshire , England
Reply to
Loading thread data ...

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.