RPTV HV Splitter / Focus Combo Block Replaced...

Sep 10, 2006 1 Replies
D

Greetings,



I just replaced a the failed (shorting) HV Splitter / Focus Combo block in my LXI RPTV. The original was a Sanyo 220493-3 and I replaced it with the 4835 310 57402 HV/FOCUS COMBO BLOCK KIT.



After replacement the TV makes a buz (seems to come from the three tubes, but I'm not sure) that sounds a bit like shorting high-voltage. On power-up the screen pulses blue and blue/green and eventually the tubes turn off (the TV remains on). Occasionally I can see arcing in the base of the tubes.



Any ideas on what could be wrong still - on what to check first?



Thanks, ~Aaron



Vote
Twitter Facebook LinkedIn
J

i think you better check your connections on that focus network, it sounds to me that you have done something very wrong and maybe even have shorted the tubes by now.. there should be if things haven't changed over the years aprox 5k volts for the focus. if your seeing this arcing in all three tubes i don't think you should be applying power to the unit until you get focus network corrected.

Real Programmers Do things like this. http://webpages.charter.net/jamie_5
Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required