Re: Split HEX files..

Hi "JA"

I am an assembly programmer for many years. Do you mean the first byte of each byte pair (word) as "low byte"? In other words, the splitter will create two separate files. The "low bytes" file will contain all the odd number (first, third, fifth, etc.) bytes of the hex file. The "high bytes" file will contain the even number bytes.

Note: Offset addresses, if it exist in the hex file, will be ignored by the splitter because of the "broken" sequence in those created files. However, if offset addresses is important, that can be arranged.

I can create the splitter program for no charge, but a small donation will be appreciated.

Regards, John

PS, Remove "ine" from email address

Hi guys! >Please i need support! >I have an hex file and i need to split it in low bytes and high bytes. >My eprom programmer just don't handle this function.I have to burn one low >bytes eprom and one high bytes eprom. >Can anyone help me splitting the file in high-low (i can send by email the >hex) or helping me finding a tool to do this? >Best Regards > >AC >
Reply to
jaugustine
Loading thread data ...

Hi John,

I'm faced with a very similar problem to split a ladder program file into odd and even addresses.

Seems perhaps your tool might work for me as well?

Let me know and I can email you the file to take a look. As suggested, a small donation can be made...

Thanks.

Lian

Reply to
lwtan

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.