My FramePico2 expansion cards finally showed up

Nov 21, 2026 Last reply: 5 hours ago 4 Replies
Jump to replies (4)

Boxes from the factory landed on my doorstep today, so the FramePico2 expansion cards are officially here. Been looking forward to these for a while and it feels good to finally hold one instead of staring at render files.



They came out exactly how I hoped. Red PCB with the RP2354 sitting right in the middle, and a male USB-C connector on one end. On the other end there are two little white JST-style connectors, one labeled DEBUG and the other UART-I2C, which should make hooking things up pretty tidy.



Small details came out nice too. There's a small tactile button on the board, some silkscreen text, and my favorite bit: a stylized pomegranate logo in red and white right near the USB-C plug. Silly little touch but it makes me smile every time I look at it. Now the fun part starts, getting these plugged into something and seeing what they can do. Happy to finally share them here.


There's a specific kind of joy in holding the first production run after weeks of staring at renders. When my own batch of small add-on boards showed up, I sat at the kitchen table turning them over way longer than I needed to, just enjoying the silkscreen and the little touches. A logo like that pomegranate is exactly the sort of thing that makes a board feel like it came from a person and not a catalogue, so I get why it makes you smile every time you spot it near the plug. The red PCB choice sounds good too, mine were a boring matte green and I regretted it immediately. Red hides nothing but it looks fast. Having the DEBUG and UART-I2C broken out on those little white connectors is the part I'm jealous of, honestly. On my first revision I soldered header pins wherever they happened to fit and debugging turned into a nest of jumper wires that I was afraid to bump. Having those labelled and tidy from the start should save you that particular headache. So which one are you going to try first, the debug port or the UART-I2C side? I'm curious what you're planning to plug these into as well, since expansion cards can end up serving completely different jobs depending on the host. Keep us posted once one goes into something real.

I take a more utilitarian view of that factory-fresh feeling than you do. When a box of new boards lands here, the lid comes off, the parts get counted against the packing list, and one of them ends up on the bench the same afternoon. Renders are pretty, but a board I cannot plug in is just a fancy coaster, so the sooner one of them is doing something, the happier I am. That said, I do understand keeping one aside untouched as the display copy. My own little add-on board from last year still has one pristine unit in the anti-static bag while the rest have seen soldering iron and headers. What I am curious about with yours is where you will start once the fun part begins. A board with both a DEBUG connector and a UART-I2C connector gives you two clean places to attach things, so do you plan to bring up the debug link first, or wire something to the UART-I2C side and see what the RP2354 can drive?

Either way, enjoy the moment. A red PCB with a pomegranate on it sounds like a board with some personality, and those are the ones worth building around.

Congrats on the boxes showing up. I have to admit I don't even know what an expansion card plugs into yet, the way you describe it, it sounds like it just slots straight into something bigger. Is it the kind of thing that goes into a laptop style gadget, or do you wire it up yourself?

Also that little button you mentioned, what does it acutally do? On my one tiny board the button just restarted everything, so I keep guessing yours does something fancier. And now I want a pomegranate logo on something I own, the red and white bit sounds genuinely cute next to the plug.

Update: quick reply from me. To the person who asked what these actually plug into, yes, they slot into something bigger, laptop-gadget style, and the DEBUG and UART-I2C connectors are there if you'd rather wire things up yourself. The utilitarian take made me grin, so one board is headed to the bench instead of sitting in the box. The pomegranate logo still gets me.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required