10 discussions on ElectronDepot about the Xilinx XC9500XL: what owners asked, what went wrong, and what fixed it.
Another jellybean logic implementation question: I have a circuit where I'd like to to count some pulses coming out of a 4000 series IC (4011B) operating at 6 volts into a '163-type counter and am running into problems with the...
I know others here have to deal with long life time support of designs, and Ihave one where I ahev to also supply the tools (free or paid) so that customercan support in at least 10 years time. The trouble is the design necessitatesa...
Hi folks,I have a fairly simple synchronous logic circuit, using a handful of flipflops and gates, which ordinarily I'd breadboard using HC TTL. However, it needs an 80MHz clock, which is too high for such families.I suspect I might need to...
Hi All,I've released the first version of my Xilinx JTAG programmer forWin32/Linux.Supports Parallel III Cable and Digilent USB. Check and of message forsupported devices!This is a very first version, so please be patient with me and...
I've been using Ise WebPack 10.1 for some time, as it is the last version that supported the Spartan 2E chips. I don't do a lot on the 2E anymore, but there are a number of units in the field with those chips. Anyway, I'm still using...
HiWe are searching a small CPLD gate count like a coolrunner 128.- Two IO banks 1.4V to 3.3V with 5V tolerant- VCC should be 3.3V or 1.8VThe 5V tolerant is important !Volume : 5000 - 10000 pcesAny CPLDs ?Regards,Laurent