Xilinx XC3S500E

12 discussions on ElectronDepot about the Xilinx XC3S500E: what owners asked, what went wrong, and what fixed it.

What owners report

Spartan-3E starter kit

Any body knows when the Spartan-3E starter kit will be availaible from Xilinx? Website says 4th quarter. Isn't it 4th quarter already?

Jaki DSP?

Witam.O Motoroli DSP mogê zapomnieæ.Mam wiêc pytanie - jaki DSP móg³bym u¿yæ który spe³ni³by wymagania:- rozdzielczo¶æ 24 lub 32bity- zewnêtrzna pamiêæ RAM na co najmniej 1M próbek (czyli 1Mx24 lub 1Mx32 bity) - najlepiej...

XC3S400 and XC3S500E in PQ208

While both Device/package combinations are listed in the datasheets, I havenot seen any of these devices "out in the wild" (means available withDigikey(*)/Nuhorizons/Avnet). I bothered Xilinx people at both Electronica2006 and Embedded...

Linux capable free/GPL SOFT CPU for XC3S500E?

Hi All,I'm looking for a possibility to run Linux (may be a ucLinux) on aXC3S500E containing CPU and some custom peripherials.The hardware platform should be a Spartan3E Starter Kit (rev. D), or something like this.I have found the almost...

Bad micro blaze behaviour during power off

setup:On one of our designs we are using a Xilinx partan3 FPGA (XC3S500E -4FT(G)256 stepping1) and an spi flash (M25P40-VMN6) to store FPGA code,callibration data, board settings,...Problem description:Random SPI commands on the SPI bus...

All discussions