10 discussions on ElectronDepot about the Motorola MPC860: what owners asked, what went wrong, and what fixed it.
HalloeleIch hab schon gegoogelt, aber nix brauchbares gefunden (vllt. warensauch die falschen Suchbegriffe...)Ich muss zur Zeit zwei Microcontrollern beibringen, sich ueber I2Czu unterhalten. Leider besitzt nur einer von beiden einen...
Started looking for another job, however no much result yet. I'mwondering whether ther is anything wrong with my resume. Therefore anycomments are highly appreciated.Thanks in advance.VladiOBJECTIVELooking for FW Development position to...
Hi, I have a lpc2478 PCB, with 16M SDRAM, 1/4 VGA LCD i. a. This board has run perfect for years. The SDRAM is 2x Micron MT48LC16M4A2. In order to modernize this PCB, the cpu is replaced with the compatible LPC1788. I have problems with...
Hi, i am working with an Embedded Planet RPX MPC860 board and amtotally new to embedded programming. All i want to do is verify thesteps to compile some code and put it into the flash memory. I canfollow the steps to make the flash image...
Does embedded system require RAM driver , does we select it when buildkernel ?When does it load , by boot loader or system Image , where is itsLinux source folder ?Why a PC Windows do not require RAM driver ?Thank for your teaching .
I am writing a simple SPI driver for this uC. I was wondering ifsomeone can help me with a little bit of C code to perform a simpleloopback test or point me in the right direction."The main obstacle is I dont know how to write RBASE and...