15 discussions on ElectronDepot about the Freescale MC9S12NE64: what owners asked, what went wrong, and what fixed it.
I would be interested to understand the RAM needs whenyou have simple Ethernet applications.Is 32kB/64 kB SRAM enough for a decent application or do you need more?I think there are simple applications where you dont need too much infobut...
Hola grupo, estoy midiendo la temperatura de un cuarto para llevar unregistro las 24 horas para lo cual tengo un ordenador colocado en el sitio.Sin embargo encuentro que seria mas comodo si pudiera adquirir los datosmediante un...
Bonjour,Je ne suis pas électronicien, juste bricoleurJusqu'à présent, j'ai utilisé le port parallèle de mes PéCé pouractionner divers éléments électriques.Je me suis même bidouillé une carte à base de portes logiques...
Hi, I'm using the MC9S12NE64 with the Freescale version of OpenTCP andI'm having some problems the the tcp/ip-stack. It sometimes doesn'tACK received data packets, which results in retransmissions. Theproblem doesen't seem to be related to...
We are developing a TCP/IP enabled embedded product and are looking fora 10/100 non-PCI Ethernet Controller for as close to $3 (budgetarypricing) as possible. We've found SMSC and Asix products as low as $8.Is there anything out there that...
Hello all, I need a recommendation for an Ethernet chip. I plan to integrate it with an MCU (probably 8 bit). Either a PIC or an AVR. I've heard of the Realtek 8019AS. Is that a good chip to work with? Is good documentation...