Atmel SAM9

12 discussions on ElectronDepot about the Atmel SAM9: what owners asked, what went wrong, and what fixed it.

What owners report

Grosse SD Card an 8-Bit Micro Controller?

Hallo Leute, Fuer Longterm Data Logging, ein Jahr oder mehr, moechten wir eine 64GB SD Card bzw. Micro-SD benutzen. Soll mit 9600bd beschrieben werden. Der Digital-Ingenieur probierte das mit einem 8-bit uC (ATMega). Wenn es auf der...

Amtel SAM9 "boot from NAND" is a myth?

We recently based a board on an Atmel AT91SAM9G20 part which the FAEand rep said could boot from NAND flash. The eval board can indeed beconfigured to boot from NAND flash. However, when it comes time tospec parts for a real product, we...

Seeking JTAG emulator for Atmel AT91 ARM Cores on Linux

Hi there,We are porting a windows application from desktop into embedded Linux on Atmel AT91 ARM Cores, thus we need JTAG to debug the firmware under a Linux environment. However, SAM-ICE only connects via USB to a PC running Microsoft...

IEEE 1284 (parallel port) slave to USB

Hi,i need to find a chipset that converts from parallel slave port protocolto USB. does this exist?you may say 1284 is a dying market. but unfortunately, some ppl are stillusing it. so the idea is, my PC still has the DB25 parallel port...

booting the Linux on bare metal board.

Hi guys I was studying about the JTAG and than I all of sudden I got few questionsin my mind regarding the linux booting on the embedded hardware. Actually I know the procedure of how the linux boots on the hardware inembedded world and...

All discussions