12 discussions on ElectronDepot about the Atmel AT91SAM7S64: what owners asked, what went wrong, and what fixed it.
Hi All,As an amateur embedded circuit player, I have used couple of AVR andPIC microcontrollers in the past.In these days it is not to hard to find small, ARM based ready to useembedded boards under $100. They seems to have faster clock...
WitamPytanko: jak (w asemblerze) skopiowaæ bit ze zmiennej w SRAM procka do portu wyj¶ciowego.W 8051 to pryszcz: MOV A, zmienna MOV C, MOV C, ale w ATmedze mam z tym powazny problem!S³awek.
First off I am new to JTAG emulation. I am required to program aXilinx configuration PROM from a microcontroller. I realize that I canprogram the PROM with a cable from the parallel port but the productwill require field upgrades. I've...
Hallo zusammen,die Post hat mal wieder Werbung verteilt. Sie möchte mir ein USB-Lesegerät schenken, damit sie (und ihre tausend Vertragspartner) mich künftig mit Werbekärtchen bombardieren können. Das Ding nennt sich "Clevercard".Hat...
We are looking at using the AT91SAM7S64 in a new project. We hadpreviously tried the ATMEGA32, but it turned out to be underpowered forour needs. The program, however, was less than 100 lines of assemblycode for the ATMEGA32.The AT91 does...
HiWe are developing a USB device which is based on AT91SAM7S64 which has a64K of flash in it. We want to store some specific data like Serial No ofthe device etc. into the flash of the microcontroller permanently. But theissue is we can not...