...
Tips for running your first multi-op contest weekend that nobody tells beginners
Nov 20, 2026
Last reply: 1 hour ago
3 Replies
My wife counted the other day and she's probaly not wrong that we have more wire in this house now than when it was built in 1978. Coax up two towers, rotor cable, control lines to the shack, buried radial wires out in the yard, and a ground run that took a whole spool of number six by the time I was done. So yes, calling ham radio a wireless hobby always gets a laugh at my house. What surprised me most when I got back into the hobby a few years ago was how much of my operating time goes to wire work. Last spring I spent two weekends replacing the ladder line that runs to my OCF dipole after the insulation cracked from three summers of sun. The antenna itself took an afternoon. The wire work took the whole weekends.
The funny part is the wireless part only works becasue the wired part is done right. A bad connection two stories up means nothing gets out, and there's no software fix for that. My neighbor thought the whole station was in the little box on my desk untill I showed him the garden of wires coming off the back panel.
Still, when I key the mic and work Japan on 20 meters from the basement, it does feel like magic. Then the antenna wire comes down in the next storm and I'm back on the ladder.
Ha, kids these days think wireless means no wires. Back in the 70s I ran a 160 meter dipole strung between two telephone poles my dad helped me set up, and I spent more time on a ladder splicing broken wire than I ever did talking. Copper wire, open-wire feeders, and a trusty old balun I wound myself on a broomstick. My XYL still complains about the holes in the fence where the ground rods went in.
For me it was a cheap wire crimper and a bag of properly sized ring terminals. Spent years twisting and taping joints at the feedpoint and wondering why my SWR drifted every time it rained. Redid everything with crimped and solder-sealed connections one Saturday and the drift just stopped. Now I check those joints every fall before the first frost and it takes ten minutes with a flashlight and a mirror on a stick. My wife calls it my annual wire inspection and just shakes her head.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required