Hi all,
Am working with this camera. wanted to know if anyone else has worked with it before. I have a set of register settings and want to know if that is right. i am working towards getting a RGB 555 VGA 640x480 configuration here is the register settings.
0x12, 0x80, 5ms delay 0x11, 0x81, 0x9E, 0x3f, 0x3B, 0x02, 0x13, 0xF2,0x00, 0x00,
0x10, 0x00, 0x01, 0x80, 0x02, 0x80, 0x13, 0xF7,0x12, 0x04,
0x04, 0x00, 0x0C, 0x00,0x18, 0x61,
0x17, 0x11, 0x32, 0x89,0x19, 0x02,
0x1A, 0x7A, 0x03, 0x00,0x0E, 0x84,
0x0F, 0x62, 0x15, 0x02, 0x1B, 0x01, 0x1E, 0x01, 0x29, 0x3C, 0x33, 0x00, 0x34, 0x07, 0x35, 0x84, 0x36, 0x00, 0x38, 0x13, 0x39, 0x43, 0x3C, 0x68, 0x3D, 0x19,0x40, 0xF1,
0x69, 0x80, 0x6B, 0x0A, 0xA1, 0x08,0x8B, 0xCC,
0x8C, 0xCC, 0x8D, 0xCF,0x14, 0x2E,
0x25, 0x58, 0x24, 0x68,if anyone has worked on it before please do check the above config and correct if something is wrong or i need to change something.
cheers! chakra.
PS: I have based this setting on one other setting sent by the tech support of the Omnivision.