This little desk companion, called FPL Buddy, keeps a Fantasy Premier League team in view all match long. It pulls live data straight from the public FPL API over Wi-Fi and displays points, rank updates, mini-league standings, player events and a countdown to the gameweek deadline. On a desk it cycles between the points and rank screens.
Under the shell sits a Waveshare ESP32-S3 development board driving a 1.46-inch circular AMOLED touchscreen at 412x412, plus a ring of 16 addressable WS2812B LEDs, all running from a rechargeable lithium-polymer battery. The body is a custom 3D-printed sphere shaped like a football, modelled in Fusion 360 and printed on a Creality machine with an automatic filament system. Assembly took a soldering station, wire strippers and helping-hand clamps, and the whole thing is small enough to hold in one hand.
The software is the part I find most impressive: the board parses the JSON stream on device and caches responses, and after the board upgrade no external proxy server is needed. Setup runs through a captive portal with a QR code for Wi-Fi credentials, and a local web server adjusts display settings and player watchlists. The code is open source and the 3D printing files are free.
There were bumps along the way. The first ESP32-C3 board, with roughly 400 KB of RAM, could not handle the 1.8 MB payload from the API; the S3, with 8 MB of PSRAM, sorted that out. Multicolour printing was another dead end, with the slicer reporting 338 filament changes and 240 g of waste. Nvkv Makes went another way instead: a white sphere with the patterns painted by hand in purple, pink and black using fine brushes and acrylics. As an open thread, the maker notes that other code could point the same hardware at F1 races, commutes or 3D printer progress.
Project by Nvkv Makes. Watch it on their YouTube channel: