Embedded Programming

Test Driven Design

Ahhhh. I've gotten past the "damn this is hard to get going" stage, and now I'm into the "oh this is much easier than i...

3 comments posted 15yrs

posted by tim

3 comments posted 15yrs posted by tim

reset code and ENTRY in linker script

Hi, Why do we specify in linker scripts the entry point using ENTRY(symbol) whe= n for example the ARM architecture alw...

2 comments posted 15yrs

posted by carlo.caione

2 comments posted 15yrs posted by carlo.caione

Boring: wire!

Hi, Sheesh, I can't believe I've never had to deal with this before! Nor do I know where to *begin*! How does one evalu...

17 comments posted 15yrs

posted by not.going.to.be

17 comments posted 15yrs posted by not.going.to.be

18 bit LVDS panel to 24 bit LVDS card adapter

Hello, First of all I'm new into the embedded world and to LVDS standard. I have an LVDS display and a VIA EPIA NL5000E...

2 comments posted 15yrs

posted by drkidd22

2 comments posted 15yrs posted by drkidd22

Telephone modules - IP telephone, ISDN, PBX

We are looking for ready-made telephone modules that can connect to an ISDN or IP-telephone PBX. They should have some...

1 comments posted 15yrs

posted by david

1 comments posted 15yrs posted by david

What does it mean: Ultralow leakage per I/0 ?

Hello, In every uC datasheet I see a parameter of current leakage per I/0, but I don't clearly understand what does it...

2 comments posted 15yrs

posted by elil1975

2 comments posted 15yrs posted by elil1975

Please name this chip (diff ser comm)

I'm using two SN75176B, one for RX lines, and one for TX lines. Chip has 8 pins, that is 6 w/o power. I'd like to repla...

4 comments posted 15yrs

posted by aleksazr

4 comments posted 15yrs posted by aleksazr

Just had a revelation

I'm working on some C++ code, and I just realized that the keywords 'private', 'protected' and 'public' really miss the...

4 comments posted 15yrs

posted by tim

4 comments posted 15yrs posted by tim

Stealth Blinky

A long standing habit with me is to make sure that whenever possible, any processor for which do the system design blin...

14 comments posted 15yrs

posted by tim

14 comments posted 15yrs posted by tim

Redboot and eCos

Hello. I would program an AMR7 LPC2138 with eCos and redboot. But there is not enough RAM to load the program on it. (w...

4 comments posted 15yrs

posted by verfaillie.romain

4 comments posted 15yrs posted by verfaillie.romain

pulse counter using LPC1768 proving to very challenging

Hi, I'm trying to counter some pulses (2-10usec width) using the LPC1768 Cortex-M3 microcontroller. There are 2 channel...

56 comments posted 15yrs

posted by naveen_pn

56 comments posted 15yrs posted by naveen_pn

Help me with simple connector choice?

I'm looking for a connector family and I'm getting overwhelmed. Maybe some of you can point me in one or more good dire...

12 comments posted 15yrs

posted by mjsilva

12 comments posted 15yrs posted by mjsilva

Inexpensive JTAG adapter for STM32 / IAR ?

As subject line says - Can anybody recommend a (cheap) JTAG adapter that works well with IAR EWARM and ST Cortex M3 chi...

9 comments posted 15yrs

posted by usenet

9 comments posted 15yrs posted by usenet

Privacy policy

Hi, I've been stewing over this for a while (and obviously have not come to a satisfactory solution) and the recent bad...

8 comments posted 15yrs

posted by not.going.to.be

8 comments posted 15yrs posted by not.going.to.be

HTTP transfer errors

Hi, It's late and I've been up too many days so I'm obviously "missing something" (besides sleep!) here... :< I'm trans...

46 comments posted 15yrs

posted by not.going.to.be

46 comments posted 15yrs posted by not.going.to.be