I sure would like to hear opinions on the ARM Cortex M3 micro.
What is the cheapest dev. board for this chip or, a schematic.
Anyone have Altium or Keil for sale.
As always, that you for your time and input.
Joe
I sure would like to hear opinions on the ARM Cortex M3 micro.
What is the cheapest dev. board for this chip or, a schematic.
Anyone have Altium or Keil for sale.
As always, that you for your time and input.
Joe
I would suggest the LPCXpresso ($30 at Digikey). Works fine until I toasted mine, unfortunately.
-ND
Linnix, is this for the Cortex M3?
Joe
Yes, LPC1343. ARM-M3 32K w/ USB.
Linnix, is this the demo board WITH PROCESSOR?
I have got so many models, types, parts going thru my head that I don't know what is what.
How close is this processor to the 8051 core?
Joe
Two processors: one for interface and one for target.
Depends on what you are trying to do.
Okay so, if I order this board, I am ready to plug it into the pc and begin? It has two processors on it? Do I need anything else hardware-wise to get going?
Joe
No
Great. I am ordering now.
I appreciate the help, Linnix.
Where are you located? I am North of Austin, Texas
Joe
South of LA, CA
I think that's also a Cortex-M3. And $9 each and you get a pair of genuine buttons, too. That comes in less than $30.
Just a thought.
Jon
Check out Mouser. If I order by 8pm I get the parts the next day standard UPS ground.
-- Joe Chisolm Marble Falls, Tx.
Hey, Jon.
Nuts, I already ordered from Digi-Key. However, they are not shipping over the holidays so maybe I can cancel and get the cheaper version from Mouser and get it quicker.
Are you certain that what you suggested is the same as what Linnix suggested?
Nevertheless, I ordered two of them and, from Mouser as Joe Chisom suggested.
Thanks for this input, Jon
Joe
Took your advice, Joe. I ordered two of them. Hope they, too, get here the next day.
I am near Salado.
Thanks
Joe
Joe,
It has been less than 24 hours since I ordered and here I sit with the ordered parts in hand. THAT IS SERVICE.
Again, thanks for the help.
Joe
That kind of service from companies like Mouser, DigiKey, and Newark, is what makes it possible for very small companies like my own to compete in niche markets. An engineer with an idea can get things done without all the overhead of purchasing departments, manager's permissions, etc. etc.
Now if I could only get the accounting departments at my customers to turn invoices into checks with similar speed! ;-)
Mark Borgerson
OTOH, there are horror stories as well. Needed to other some parts. Digikey and Mouser don't stock them, and need to buy 1000 and wait several weeks. Canadian F* got them, and better prices in small qty. Got in the web. Entered the order. Punched in credit card number. Submitted... Nothing happen. Got back to the main screen. Reg. with new account. Login with new account. Wrong Password!!! Click on forgot password link. Check my email. Nothing there. Tried "forgot password" again. Still Nothing. Call them. The one lady handling all internet sale was out to lunch. Tried again the next day. She needed to email me the account form. Next day, still nothing in email.
Forget it, I'll buy 1000 from Digikey. If I have so much trouble before paying, what would happen after paying F*.
I must admit I've made design decisions based on what's available at DigiKey only to get bitten on the butt two years later when the parts were out of stock with 12-week lead times. In general, when they're out of stock at DigiKey, they're also hard to find from other sources. Alas, that has happened when a customer placed an order that doubled the annual volume for a particular board. They hate it when you say you can deliver 10 this week, but the next
30 may be 12 weeks out. Of course, those orders always come in just before vacations or holidays! ;-(Alas, for companies with small volumes in niche markets, inventory control can be more magic than management. I don't want to retire in a few years with two years worth of parts unused on the shelf.
Mark Borgerson
I really admire those companies that understand that expedience builds loyalty.
I do not see how that STM can sell this eval. board for this price except that it is, for them, a loss leader that will pay off hugely when designs reach fruition.
I wish that there was someone around here, near Salado, that could collaborate on the Cortex M3.
Yes, the agility of a small company can reap huge rewards.
Joe
What sort of collaboration are you thinking of? I have never found distance to be much of an issue in regards to collaboration. Time and motivation are usually much bigger factors whether a business project or a hobby project.
Rick
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.