Q: What connector is this?

I bought some 10-way ones from Farnell, IIRC. The 'official' crimp tool is very expensive but I managed with a cheap one I got for Molex connectors. I cut them down to make smaller ones; you might be able to make single ones, with care.

Leon

techie_alison schrieb:

Take a look at:

cheers Gunther

No, thank you :) That's brilliant info, especially the Farnell bit to find a direction. Determined to find the 1-way ones, I don't fancy chopping up dozens of them for use with a logic analyser.

Thanks to Gunther and Leon,

Aly

If you want nice sturdy leads, you might buy them already attached to wires from Pomona.

How about

Looks like they do carry the single row single position type.

Vito

Hi Vito :)

That's spot on, 1-way 0.1". Postage not on the cheap side though to the UK, about $40 or $14 will a 5 week lead time.

Had this a while back with a USA company who wanted $60 to post a 19pin D-Type.

Aly

Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.7, 50+ £0.067 Looking in the 2003/4 Book.

website

misstyped, and forgot a 0 in the one of price. Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.07, 50+ £0.067

Was gonna say :) 70p for a 1-way.

Checking out now .....sent them an email.

Brill :)

Aly

techie_alison scrobe on the papyrus:

Hi Aly,

I spent several days looking for just such a connector about a year ago. No luck, so I ended up buying enclosed crimp terminals from RS (233-0022 or 233-0033 depending on your wire diameter) and a length of

Hi John,

Yeah, whizzed through here as a lightbulb moment earlier. Sounds like quite a good idea actually. Don't have to be quite so critical in keeping the solder perfect on the crimp either.

Definitely going to look into that :)

Thanks,

Aly

the UK,

Just by a couple of the crimp tools and it'll make that shipping look like pocket change. Do people really pay $650.00 for a crimp tool?

In the aerospace and power industries, that and a lot more....

If you can find the base connector you can make singles with heat shrink tubing over the raw female part of the connector.

hmm I got me a crimp tool that can do two size terminals and it cost £20, and it works very well, very solid built to.

From :

Hehee :)

I use one of those as well. 8-)

Leon