I drew up a schematic that should work, you can see it at
formatting link
Brian
I drew up a schematic that should work, you can see it at
Brian
Suppose I have a TTL IC which has two outputs. I want to drive a small bulb with a transistor (example NPN BFY51) via a 12V rail. How hard would it be to drive the bulb so..
If both o/p's = 0, bulb off output A = 1, bulb on output B = 1, bulb fades on over 1/2 sec. output B = 0, bulb fades off over 1/2 sec.
output A+B would not be used.
Graham
ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.