Building a remote control mower

We are building a robot mower so we don't have to bear the cold winter. I have a 120V AC mower and a gas powered mower that cuts a leveled 20'x40' grass field perfectly fine. I have a remote control and a receiver capable of a hundred meters that can switch a relay to get a DC motor to go in forward or reverse. I also have two 8-Amps DC motors and two indrustrial drill AC motors.

We've never built a mower like this before so we don't know if we should go with AC or DC motors or know the best way to transfer power to the wheels. How should we begin building a robot grass cutting mower?

Thanks

Reply to
Nick Huckaby
Loading thread data ...

A seek and destroy for those pesky moles that leave hills all over my yard would be idea. I'd buy it.

Reply to
Lane

He already has the remote control snowblower.

--
Regards,
   Robert Monsen

"Your Highness, I have no need of this hypothesis."
     - Pierre Laplace (1749-1827), to Napoleon,
        on why his works on celestial mechanics make no mention of God.
Reply to
Robert Monsen

You can cut grass in your "cold" winter?

Reply to
WoofWoof

right over your neighbors cats?

In electric RC cars, the same battery that spins the wheels powers the receiver, and the wheels stop spinning long before the battery is to low to power the receiver. The real question is, what happens if it goes out of range or there is some kind of radio interference?

--
Chris W

Gift Giving Made Easy
Get the gifts you want & 
give the gifts they want
http://thewishzone.com
Reply to
Chris W

"Nick Huckaby" wrote in message news:1110034205.a2af8d4aea092dde8fa9095747643f2a@bubbanews... | We are building a robot mower so we don't have to bear the cold | winter. I have a 120V AC mower and a gas powered mower that cuts | a leveled 20'x40' grass field perfectly fine. I have a remote control | and a receiver capable of a hundred meters that can switch a relay to | get a DC motor to go in forward or reverse. I also have two 8-Amps DC | motors and two indrustrial drill AC motors. | | We've never built a mower like this before so we don't know if we should go | with AC or DC motors or know the best way to transfer power to the | wheels. How should we begin building a robot grass cutting mower? | | Thanks

  1. How can you get AC power to the mower without it being wireless? If you plan on using a wireless system and AC motors, then you have a lot of electronics learning to do first. 2. What happens if the batteries in the receiver go dead? Will it just mow right over your neighbors cats? 3. A receiver that can switch a relay for a DC motor is highly unlikely strong enough for a high current DC motor from a cordless mower. You will need a second, more powerful relay/contactor for that job. 4. Get on some robotics forums and groups and learn a lot more. RC groups are good, but in this case, there's a lot of crossover and more basic robotics than RC. 5. RC servos can be modified to run as motors with proportional control. A pair are popular for robots, but if you go for motors big enough for your robot you need to go with purpose built designs. Visit surpluscenter.com for a couple useful drivetrains.
Reply to
carl mciver

In message , carl mciver writes

Sound's like an ideal selling point for me, maybe you could upgrade it to seek and destroy? Especially for evil faced black and white cats that

*do NOT* bury their crap after they've left it in my garden every day.
--
Clint Sharp
Reply to
Clint Sharp

for completely wireless i'd suggest you use the gas mower and an alternator. you pull the starter cord off and you can usually bolt a spool to the top, add a pulley under the spool and you have a place for the alternator to go, which of course means you'll use dc(though not necessarily).

--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
Reply to
jim dorey

RC receivers have a failsafe mode that they go into if the transmission is interupted. For example my plane's receiver is preprogrammed to idle the engine and circle left until it gets further instructions (or it hits the ground)

Reply to
ff

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.