Stereo Plug/Jack Standardization

Sep 30, 2006 13 Replies

Is there any standardization of the connections to stereo plugs/jacks?



Tip: Left (or Right) ??



Ring: (Right (or Left) ??



Inquiring minds want to know ;-)



...Jim Thompson



-- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | |

formatting link
| 1962 | I love to cook with wine. Sometimes I even put it in the food.


Jim Thompson schrieb:

formatting link

Regards, Dieter

Super! Thanks, Dieter!

...Jim Thompson

-- | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | |

formatting link
| 1962 | I love to cook with wine. Sometimes I even put it in the food.

Tip = Left? Seems to be on my Sony Buds.

Cheers

"Jim Thompson" wrote in message news: snipped-for-privacy@4ax.com...

Yeppers, tip: left, ring: right. You can find this on any number of audio sites. Also, when cooking up a batch of patch cables I always use red: left, white: right. I can't swear to this being a standard (I recall having seen it) as I can't find any references right now but it works for me.

- YD.

I thought it was red for right and white for left. Looking at the back of my Sony mult-disk player confirms it -- the jacks themselves are color-coded that way. Anyway, if they're backwards when you're listening, all you have to do is swivel your head around 180 degrees.

-- John

Tip = left Ring = right

Convention from 1/4 inch days perpetuated into the 1/8 inch (3.5mm) portable device generation with the Sony Walkman, et.al.

Impedances and sensitivity are a whole 'nuther couple of matters, however. Recent discussion over on r.a.p

The patch cables won't affect the "sided-ness" of the signals, it's still tip-tip and ring-ring. In fact, you can use any colors you like or have handy as long as you're consistent about it.

- YD.

Remove HAT if replying by mail.

"YD" wrote in news:12hu8ur6ofnq3d2 @corp.supernews.com:

Check out any VCR. Red = right --- Left = white

I have always used (R)ed = (r)ight as found to be true in any audio device(using colored connecters) I have come across. R = r is the convention that holds true 99.9% of time. IMHO

buck

Just when I thought thinking the world was synchronized I found out the tape adapter I am using to feed MP3s to the car stereo is backward from the sub woofer and they are out of phase. It sounds nasty.

Yes, but those are RCA jacks, not the 3 mm stereo plugs this started out about. Anyway, for the patch cables it's mainly a matter of which goes where, the colors of what goes in between don't really matter. Easy enough to change over next time I make a couple. Sometimes I've had to make do with blue and yellow.

- YD.

snipped-for-privacy@pitt.edu (GregS) wrote in news:eg0epq$e81$ snipped-for-privacy@usenet01.srv.cis.pitt.edu:

Very good! I hadn't thought of that one. I knew the tip was left, but your offering is clever.

buck

An old telephone installer once told me their mantra was "red-right-ring"

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required