RF design Mag article

snip

I find Spamgourmet even better. You make up a fresh email address that is a unique "on-the-fly" one. You can also set the number of times it's used before it automatically dies (1 to 20) So you know if some ratbag onsells your email address. See

Barry Lennox

Hi, James -

I would very much appreciate a 600 dpi copy of that article. Please send it to info at sophisticatedsolutions dot net.

Thank you for your very generous offer.

Sincerely, John

Also in the July 1989 issue of "73". I have a photocopy of that article...

I made a mistake in my email address. It is corrected above.

Sorry.

John

Ah hah -- I sent a copy yesterday to the first address and wondered if it arrived. I'm sending another copy your way right now...

TO ALL: I discovered some related items in my file, including a more logically and aesthetically drawn schematic (electrically identical) by Bill Parker, W8DMR, published in the Jan/Feb 1989 issue of Spec-Com, and a 13cm ATV downconverter, also by W8DMR, published in the July 1989 issue of Amateur Televison Quarterly.

The schematic has a note about a 45-page booklet on the project that was available for $5 (to cover copying), and the downconverter article includes a note from another builder that the LF357 spec'd for the modulator is too slow to pass video; a faster op-amp is suggested.

These articles used larger type, and so scanned to "very good quality" at 300dpi.

John Popelish was kind enough to do some image processing and prepare a smaller, all-in-one .GIF version only 332KB in size.

Because of the diversity of people's needs, and yet still staying within my ISP-set limitations, I've posted some of the lower-quality

For the reasons I've already stated, this is a *temporary* site intended to facilitate sharing these articles with this group. I will remove it in a week or so.

If any of the above appeal, I'll be delighted to oblige with e-mail copies.

Regards, James Arthur

Clarification: The all-in-one .GIF is of the RF Design article, and it's 323KB, not 332KB. It's posted on the linked site.

James

Thanks, James. I'd also be interested in option (1) above. My address is in the clear in the post's From: address, I believe.

Jon

Hi James,

Can you email me a copy of that article. Thnaks!

Heres my address. snipped-for-privacy@yahoo.com

Thanks!

snipped-for-privacy@yahoo.com wrote:

Is this any help?