Filter Question! How to get rid of SPIKES!

Hello,

I have a 60Hz AC voltage comming from a transformer 120/220V that=20 powers some cooling fans, but it's got some spikes at the output, and=20 Im having problems with that. The spikes are burning the fans.

Here is the link of the wave form:

formatting link
wave.jpg

What the main problem is at 2Khz, am I right?

I want to make a filter to attenuate those spikes, but I=B4ve never done=20 a filter for voltages above 12V. I know just how to use op-amps, but=20 for 220V Its got to be a passive filter.

Does anybody have an idea of what type of filter would be more=20 appropriate? Low pass, tuned filters....

I have JUST some 3,9mH inductors to make it, the other components can=20 be anything to match the configuration.

Anything will be helpful!!! Thanks a lot! Victor

Reply to
Victor hyppolito
Loading thread data ...
** Groper Alert

I have a 60Hz AC voltage comming from a transformer 120/220V that powers some cooling fans, but it's got some spikes at the output, and Im having problems with that. The spikes are burning the fans.

** What exactly is burning ?

The brushes in the fan motors ?

Here is the link of the wave form:

formatting link

** Looks like commutation noise spikes from a brush ( AC/DC ) motor.

** Not even close.

I Does anybody have an idea of what type of filter would be more appropriate? Low pass, tuned filters....

** Try using a capacitor wired across each motor.

Start with a 100nF, 250 volt AC rated cap and increase the value as needed.

But that will not stop brushes burning.

...... Phil

Reply to
Phil Allison

Fix the problem that is causing the spikes, which may or may not be causing the fans to burn out.

Tam

Reply to
Tam/WB2TT

"Tam/WB2TT"

** Go tell the OP that one - not me.

....... Phil

Reply to
Phil Allison

Phil, would you kindly just give it a rest? Since when are _you_ representing the s.e.d. community?

Reply to
Winfield Hill

"Winfield Hill"

** As usual - Win has totally misread the thread.

TAM carelessly posted his dopey remark to ME.

It should have been to the OP.

** There is no " s.e.d community " and no-one represents a NG.

Clearly, YOU falsely imagine there is and YOU falsely imagine that YOU do.

How grandiose & delusional of you.

Got any more asinine fallacies you feel like getting off your chest today - Win ??

....... Phil

Reply to
Phil Allison

Like I said, would you kindly just give it a rest? We're tired of reading your gratuitous outbursts. When making a simple conversation in these threads, it's certainly not necessary to make every comment exactly under and in response to the person being commented to, get it? We could all see that Tam was responding to Victor suggesting he fix the problem that was causing the spikes, and we didn't need to see your lecture about exactly where in the thread he should have made his innocent post. In fact, it appears to me Tam was seconding to Victor your suggestion of placing a capacitor across the motor, and if so, his comment after your post was a good place for it. This is just usenet, after all, so please do kindly give it a rest. Sheesh!

Reply to
Winfield Hill

"Winfield Hill - Blowing Smoke Out His Arse "

** Go straight to hell, you posturing pommy ass.

** Yawn - speak only for yourself, you posturing pommy ass.

There is no " s.e.d community " and no-one represents a NG.

Clearly, YOU falsely imagine there is and YOU falsely imagine that YOU do.

How grandiose & delusional of you.

Go straight into hell.

** NG posting is not a conversation.

Yet another of your asinine fallacies.

** Yawn - yet another asinine fallacy.

** Not again !!!!!

Speak only for yourself, you posturing pommy ass !!!!

** And another one !!!!!

Speak only for yourself, you posturing pommy ass !!!

There is no " s.e.d community " and no-one represents a NG.

Clearly, YOU falsely imagine there is and YOU falsely imagine that YOU do.

How grandiose & delusional of you.

** The phrase: " Go tell the OP that one - not me. " simply aint any kind of a lecture.

How grandiose & delusional of you to pretend it is.

Go straight into hell.

** Yawn - who the hell cares what a grandiose, delusional pommy wanker imagines ?

Until the OP returns and says exactly what kind of motors he has, commenting further on his post is a waste of time.

Mr Hill:

Berating me over one simple and quite fair comment is

UTTERLY INSANE !!!!!

FUCK OFF you boring old Wind Bag !!

....... Phil

Reply to
Phil Allison

I know that, but you are the only poster that shows up on this subject. I hoped that the OP would look at your response, and see my comment. It is not dopey; if the spikes are actually causing the fans to blow, they are causing other problems also.

Tam

Reply to
Tam/WB2TT

"Tam/WB2TT"

** Thankyou for your most honest reply.

Which ** alone ** justifies my comment in response.

" Go tell the OP that one - not me."

** OK - so the only horse in sight must carry the load .....

Which third word f****ng shit hole is that philosophy from ??

** Hoping is just not good enough.

Be aware of WHO you are addressing in future -

lest your f****it remarks get you in the poo again.

** It was as dopey as all hell.
** What do you do for a living ?

Collect bus tickets maybe ??

Piss off.

...... Phil

Reply to
Phil Allison

Win, you need to get out more. ;-)

Cheers! Rich

Reply to
Rich Grise

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.