741 OP_AMP Thermocouple

Keeping the circuit simple as possible for maxium output voltage, if a thermocouple is conected to inputs pin 2 and pin3 is a resisor required between input of pin 2 to output of pin 6 for maxium output voltage or the resistor is not even required.

In replace of the resistor can a conection be made between input of pin 2 to output of pin 6.

Any sensor that generates its own voltage in mili volts can that be fed to the inputs of pins 2 and 3 or is a negative feed back required for maxium voltage output of pin 6

Thanks Robert

Reply to
Robert
Loading thread data ...

assignment help is expensive, but you get wat u pay 4, hey!

: : Keeping the circuit simple as possible for maxium output voltage, if a : thermocouple is conected to inputs pin 2 and pin3 is a resisor required : between input of pin 2 to output of pin 6

yes

for maxium output voltage or the resistor is not even required.

yes

: In replace of the resistor can a conection be made between input of pin 2 to : output of pin 6.

yes

: Any sensor that generates its own voltage in mili volts can that be fed to : the inputs of pins 2 and 3

yes but

: or is a negative feed back required for maxium : voltage output of pin 6

yes, otherwise the o/p will saturate due to the opon loop gane bein very hi \ : : : : : Thanks Robert

thanku ps hows the engrish classes going

: :

Reply to
Ed-

correction - crasses

Reply to
Rob

Thanks for the hepl you piece of shit, sounds like you are a goverment worker looking at your email address, spend to much time looking for spelling errors then helping people KUN******

Reply to
Robert

Why don`t you help people then giving them shit you arshole you KUN*******

Reply to
Robert

Take a chill pill or two.

damm, now you know my workplace...

btw, ow goods ur spam filtr you little tosser?

: > : : > : Keeping the circuit simple as possible for maxium output voltage, if a : > : thermocouple is conected to inputs pin 2 and pin3 is a resisor : > required : > : between input of pin 2 to output of pin 6 : >

: > yes : >

: > for maxium output voltage or the resistor is not even required. : >

: > yes : >

: > : In replace of the resistor can a conection be made between input of : > pin 2 to : > : output of pin 6. : >

: > yes : >

: > : Any sensor that generates its own voltage in mili volts can that be : > fed to : > : the inputs of pins 2 and 3 : >

: > yes but : >

: > : or is a negative feed back required for maxium : > : voltage output of pin 6 : >

: > yes, otherwise the o/p will saturate due to the opon loop gane bein very : > hi : > \ : > : : > : : > : : > : : > : Thanks Robert : >

: > thanku : > ps hows the engrish classes going : >

: > : : > : : >

: :

Reply to
Ed-

ElectronDepot website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.